« previous next »
Pages: [1] 2   Go Down

Author Topic: Cherry vase  (Read 3080 times)

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Cherry vase
« on: December 27, 2011, 11:48:26 am »
A post by DW Sudekum inspired me to post my latest vase. It is not very fancy or unusual but, I am especially proud of the finish that I got.
It measures 8"in diameter and 11" tall. I also made a "cork/plug" for the top opening to keep dust out.





It was made from a cherry board that was 8-1/2" wide, 3/4" thick and 22" long.
The finish I used was two coats of shellac sanded with 220 and  400 grit paper. Then I did four coats of wipe-on polyurethane that was sanded with brown paper sack (about 4000 grit) between each coat. (I did the finish inside before the last glue-up around the middle before starting on the outside.)
As anyone who has ever made a vase or bowl knows, cutting it is easy, gluing isn't too bad but, sanding is a real BEAR and the finish takes a lot of time but, it can be done with patients.
I hope that between DW and I we can encourage more folks to try a bowl or vase.

Rog
Logged
An ounce of responsablity is worth 10 pounds of state and fedral laws.

Offline Judy Hunter

  • *****
  • Hero Member
  • Posts: 2694
  • The world moves on.
    • View Profile
    • Artistic Sawdust and Other Fun Stuff
Re: Cherry vase
« Reply #1 on: December 27, 2011, 11:50:52 am »
BEAUTIFUL!!!
Logged
I'm from North Dakota

Offline DWSudekum

  • *****
  • Hero Member
  • Posts: 3677
    • View Profile
    • The DW Collection
Re: Cherry vase
« Reply #2 on: December 27, 2011, 12:05:11 pm »
Very very nicely done Rog.  They are simple to do and look great.  Thanks for sharing it with us.

DW
Logged
Life is tough, it is even tougher if you are stupid  -  John Wayne

Offline Marcellarius

  • *****
  • Hero Member
  • Posts: 6135
  • Scrolling each day, keeps the doctor away
    • View Profile
    • Some of my work
Re: Cherry vase
« Reply #3 on: December 27, 2011, 12:31:10 pm »
Wow, great vase!! great wood choice!
Logged
Marcel

sometimes I make designer firewood....

Offline Keefie

  • *****
  • Hero Member
  • Posts: 4550
    • View Profile
Re: Cherry vase
« Reply #4 on: December 27, 2011, 01:04:56 pm »
I've always liked Cherry to work with especially with my woodturning, but I must say you have done a very nice job of making that bowl and the finish is fantastic
Logged
It's all a case of "Mind over Matter",  The Government don't Mind, and I don't Matter.

Offline Russ C

  • *****
  • Hero Member
  • Global Moderator
  • Posts: 8458
  • Central Florida - USA
    • View Profile
Re: Cherry vase
« Reply #5 on: December 27, 2011, 01:37:22 pm »
Looks awesome Roger, great job!  :)
Logged
russ@simplywoodencreations.com

Keep The Blade On The Line.

daliclimbs

  • Guest
Re: Cherry vase
« Reply #6 on: December 27, 2011, 02:18:45 pm »
That looks great! I have yet to make any bowls or vases with my scroll saw. I always turn them on my lathe. Perhaps one of these days I will give it a go.
Logged

Offline Keefie

  • *****
  • Hero Member
  • Posts: 4550
    • View Profile
Re: Cherry vase
« Reply #7 on: December 27, 2011, 02:28:20 pm »
Me too daliclimbs, I cheat as it's much easier to sand and finish on the lathe.
Logged
It's all a case of "Mind over Matter",  The Government don't Mind, and I don't Matter.

daliclimbs

  • Guest
Re: Cherry vase
« Reply #8 on: December 27, 2011, 02:36:24 pm »
Quote from: Keefie on December 27, 2011, 02:28:20 pm
Me too daliclimbs, I cheat as it's much easier to sand and finish on the lathe.

LOL. Exactly buddy! The other upside of the lathe is When I do make a scroll saw bowl I'm mounting it to a waste block and sanding on the lathe. So either way I'm not escaping the lathe LOL..
Logged

Offline newfie

  • *****
  • Hero Member
  • Posts: 5037
  • The Way I Scroll
    • View Profile
    • some of my woodworking
Re: Cherry vase
« Reply #9 on: December 27, 2011, 05:14:35 pm »
beautiful job Roger thanks for sharing
Logged


excalibur 21
Every woodworker needs a fireplace

Offline Barry

  • ****
  • Sr. Member
  • Posts: 397
    • View Profile
Re: Cherry vase
« Reply #10 on: December 27, 2011, 09:42:03 pm »
It is a beautiful finish.  You said it is not too fancy, but I disagree.  Nothing looks better than clean lines and nice hardwood.  You did an awesome job and all that sanding made for a great vase.  Thanks for sharing, Rog.

Barry
Logged

Offline Dakota Saw Dust

  • ****
  • Sr. Member
  • Posts: 319
  • Sioux Falls, South Dakota, USA
    • View Profile
Re: Cherry vase
« Reply #11 on: December 27, 2011, 10:46:53 pm »
Rog - that highlight on the front of your vase is proof positive that your finishing is AAA rated or higher.  That is a beautiful piece of craftsmanship.
Logged

Offline wombatie

  • *****
  • Hero Member
  • Posts: 5557
  • Victoria Australia
    • View Profile
Re: Cherry vase
« Reply #12 on: December 28, 2011, 03:50:44 am »
Thats beautiful, I love it.

Marg
Logged
MARG

No one notices what I do until I'm not here to do it............

Offline geneVG

  • *****
  • Hero Member
  • Posts: 905
    • View Profile
Re: Cherry vase
« Reply #13 on: December 28, 2011, 07:26:26 am »
The vase is awsome Rog.

gene
Logged
Gene Van Grevenhof

Offline frankorona

  • *****
  • Hero Member
  • Posts: 4030
  • Frankorona (Frank) (Crown)
    • View Profile
    • Frankorona?s workshop
Re: Cherry vase
« Reply #14 on: December 28, 2011, 10:08:19 am »
Very nice job, congratulations to you.
Logged
Pages: [1] 2   Go Up
« previous next »
 

SMF

Teknoromi

SMF Links

  1. XHTML
  2. RSS
  3. WAP2
  4. Theme by snrj