Author Topic: Cyclone Dust Vacuum - will it work? (Read 2175 times)

tux_linux · « **on:** August 19, 2011, 03:55:51 pm »

Hey!

I have this idea to build a dust collecting system.
I'm trying to base it on the cyclone systems. It should work like a cyclone - without making noise like a cyclone. I want it as silent as possible.

(click on picture for bigger view)

I'm using 2 extra powerful but silent computer fans, each 4.75" x 4.75". To maintain the air flow and to "align" the air I would add boards into the airbox (the part with the spelling fail

) Behind that would be the dust extractor, 2" high and width. It will have 2 sloped, extram slick boards which hopefully will cause the air to speed up and make an extrem sharp turn upwards while the dust falls into the dust box. Here I would ad a drawer for simple cleaning.

What do you think - might this work

Or am I completely wrong

Any additional thoughts?

jimbo · « **Reply #1 on:** August 19, 2011, 04:00:02 pm »

They do something similar for wood chips but I think the fine wood dust would be to light and continue into the fan, only way to find out is to try it, good luck
Jimbo

Russ C · « **Reply #2 on:** August 19, 2011, 08:22:39 pm »

I agree with Jimbo. The reason the Cyclone Dust system works is the extreme centrifugal force slings the larger dust to the side walls of the conical tube and they fall out the bottom. But it still uses a filter for the fine particals. You might still need a filter in yours. Like Jimbo said only one way to find out, try it.

Gabby · « **Reply #3 on:** August 20, 2011, 12:08:31 am »

Torsten they use powerful fans to pull paint over spray from painting booths , and dust from sanding operations, and grease in restaurants through a filter element. Fast moving air will pull most of the dust right through your fan without something to stop it. Several people have set up a box arangement behind their dust making machine with a fan to pull the air through. The fans need to be shielded so they can only pull air through the filter. The filters can be washable with a garden hose, or the throw away kind used in air conditioning ahd heating installations.

I hope this helps you.
Gabby

tux_linux · « **Reply #4 on:** August 20, 2011, 05:41:20 am »

hmm, so you think I would still need a vaccum bag... let's see. I'll build this basic setup in a short time and think of some additional features..

Gabby · « **Reply #5 on:** August 20, 2011, 10:12:32 pm »

Quote from: Torsten on August 20, 2011, 05:41:20 am

hmm, so you think I would still need a vaccum bag... let's see. I'll build this basic setup in a short time and think of some additional features..

Not necessarily a bag, but there has to be something to slow the air flow enough for the dust to settle, or trap it. As fine as the dust is from scrolling it can fly a long way with the least of breezes so that is your problem with your cyclone idea. Which is why I suggested the flat AC type filter
We have 4 dogs and a cat in our house, their coats bring in fine dust and dander that ends up being pulled through our circulation fans and spread throught the house keeping the master duster (my wife) busy all the time cleaning it off surfaces. I have to periodically clean the cages and fan blades of dust and grime that sticks to them. What a mess!
If you are not in a big hurry I'll try to draw up a simple dust trap for you.
Gabby

tux_linux · « **Reply #6 on:** August 21, 2011, 03:24:55 am »

That would be fine Gabby!

So your idea is to slow down the air so that the dust is no more carried...
hmm, need to think of that.

Gabby · « **Reply #7 on:** August 21, 2011, 04:25:33 am »

Quote from: Torsten on August 21, 2011, 03:24:55 am

That would be fine Gabby!

So your idea is to slow down the air so that the dust is no more carried...
hmm, need to think of that.

Possibly a few baffles and a larger outlet than the inlet would help slow the air back down but I think this dust is still so fine some would be going through your fans.
Gabby

Gabby · « **Reply #8 on:** August 21, 2011, 05:34:09 am »

I have posted a drawing in the gallery so you can see the detail easier. Let me know when you have seen and copied it or whatever so I can take it down, I don't think Steve wants this sort of thing there all the time.
I hope this helps you with your design.
I'll send you an invoice for the design. A dollar two ninety eight! LOL

Gabby

tux_linux · « **Reply #9 on:** August 21, 2011, 11:05:09 am »

thx Gabby. This leads to a classic filter design.
I have a shop vacuum on which I can push a button to shake the filter, so that the dust is able to fall off. This could be an additional idea.

Gabby · « **Reply #10 on:** August 21, 2011, 03:01:07 pm »

OK So can I delete the picture from the gallery?
Gabby

tux_linux · « **Reply #11 on:** August 23, 2011, 03:37:36 am »

do so if you want too. thx.

Gabby · « **Reply #12 on:** August 23, 2011, 03:46:39 pm »

After all of this discussion and my drawing efforts, I'd like to see what you finally come up with.
What ever it is I hope it works well for you.
Gabby

Gabby · « **Reply #13 on:** August 23, 2011, 03:48:53 pm »

I see there has been interest in this topic, I'll leave my drawing in the gallery for a few more hours. But I'll pull it later today.
Gabby

tux_linux · « **Reply #14 on:** August 24, 2011, 10:50:23 am »

I will show you what I'll build - promised. Should be interesting to have such a device.

News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.