Author Topic: Removable Adhesive Paper (Read 4091 times)

geneVG · « **on:** August 16, 2011, 10:36:31 pm »

And a Good Evening to everyone,
A while back I ask about Sloan and I had good reports. Well. I ordered from them, and gor my clocks and other stuff too. I also ordered some removable adhesive paper. I used it today. And I have to saay it sure beats any spray. It peeled off with very little scrapeing, and there was no glue to deal with. I just thought I would let you all know about it, which most of you alreay knew.

gene

dgman · « **Reply #1 on:** August 16, 2011, 10:48:34 pm »

Thanks for the tip Gene. I have not used the adhesive paper. I plan to try it sometime.

geneVG · « **Reply #2 on:** August 16, 2011, 11:09:20 pm »

one other thing Dan, it dosn't lift up off the board either while you are cutting.

gene

towdude3 · « **Reply #3 on:** August 17, 2011, 12:00:41 am »

i have been using removable paper for years now. i would never go back to the spray glue. i stick it on blue tape and it has never lifted up while cutting and it is very easy to removed. no more heat guns and mineral spirits. Mike

tux_linux · « **Reply #4 on:** August 17, 2011, 12:02:41 am »

That's what I'm talking about! I'm using adhesive paper too.
It's so easy, come off so simple. I usually put the sticker above the painter tape to avoid ripping the sticker. Works also for fragile parts!

To the concern about the cost: It's a big time saver, no handling of heat guns and other tools. Just rip the pattern sticker off.

BilltheDiver · « **Reply #5 on:** August 17, 2011, 01:09:01 am »

I like it to! I have also just bought nearly the same thing from office supply stores. I don't use it exclusively, but quite often. As Torsten said, the increased cost is paid for in convenience and time savings. Often I will print more than a single pattern on a sheet to make use of the whole sheet, and then just use the 2nd pattern when needed.

Russ C · « **Reply #6 on:** August 17, 2011, 07:54:15 am »

This is something I may try in the near future. It does sound convenient.

tux_linux · « **Reply #7 on:** August 17, 2011, 12:11:37 pm »

@Bill
That's what I'm doing too. It also helps on saving wood if the patterns are already packed. I also have a folder in my wood shop for the patterns I do not use directly.

newfie · « **Reply #8 on:** August 17, 2011, 05:56:35 pm »

been using a similar product staples for quite awhile now.i use painters tape on the wood first then the Adhesive Paper. works great

beginner · « **Reply #9 on:** August 17, 2011, 07:31:43 pm »

I use plain old shelof paper. Cut it to the size I want run it through the printer peel the backing stick it on the wood and cut. Works for me.

Gabby · « **Reply #10 on:** August 18, 2011, 03:24:36 am »

All this talk is great, but no one is mentioning product names or cost per sheet or sizes.
How about the nitty gritty guys.
I know back when I was messing with RC planes I wanted to make some decals to put on it.
Clear adhesive "paper" was a buck a sheet 8 1/2 by 11 at local ofice supply slash print shop.
Don't ask the name all I remember is it started with "A". LOL
Gabby

yyyyyguy · « **Reply #11 on:** August 18, 2011, 08:29:15 am »

Haven't tried the adhesive paper, do you not use the packing tape with that stuff??

geneVG · « **Reply #12 on:** August 18, 2011, 09:50:38 am »

I still put the tape on the bottom or top to help lub the blade.

gene

tux_linux · « **Reply #13 on:** August 18, 2011, 02:12:29 pm »

@ Gabby
The cost is relative. You need to consider the simpler handling, the time you can save. Also think of the less complicated removing of the pattern - even fragile parts can easily be handled.

Gabby · « **Reply #14 on:** August 18, 2011, 10:13:22 pm »

Still didn't answer my questions Torsten.

Gabby

News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.