Author Topic: DW788 worklight  (Read 1826 times)

shutterbugdm

  • Guest
DW788 worklight
« on: April 08, 2011, 07:12:46 pm »
Where does one get a replacement bulb for the DW788 scroll saw worklight (DW7881)?

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Re: DW788 worklight
« Reply #1 on: April 08, 2011, 09:26:37 pm »
I get mine at Ace Hardware....Part number 3019817....Accent Floodlight Indoor....25 watt   R14 bulb.
I'm sure they can be had at almost any hardware store or even maybe at some grocery or Wallmart type stores.
Just my 2 cents worth.

Rog
An ounce of responsablity is worth 10 pounds of state and fedral laws.

shutterbugdm

  • Guest
Re: DW788 worklight
« Reply #2 on: April 08, 2011, 09:59:24 pm »
how does it stand up to the vibration? short life?

Offline mrsn

  • *****
  • Hero Member
  • Posts: 1258
    • View Profile
Re: DW788 worklight
« Reply #3 on: April 08, 2011, 11:33:16 pm »
I found a replacement light for my hitachi saw at lowes, it was in with the appliance bulbs. I took the old one along to compare.
Mine lasted about 5 minuets before burning out, well actually shaking the pieces loose. The bulb should really be a rough service type. I couldn't find one (ok, I didn't look that well) so I just modified an adjustable desk lamp to fit near my saw, way better light then the little light on the saw.
MrsN

Offline Rapid Roger

  • *****
  • Hero Member
  • Posts: 1468
  • Hutchinson, Kansas
    • View Profile
Re: DW788 worklight
« Reply #4 on: April 09, 2011, 11:05:22 am »
I've had real good luck with the ones I use. Vibration doesn't seem to bother it but, I did go off on a weekend and left the light on the whole time and I think the heat finally got it.
They are some what hard to change because of the size of the bulb and the shade surrounding it.
I had tried other bulbs and didn't have much luck until I looked it up in the manual and found it required a 25 watt bulb. Lesser wattage's just don't cut it!

Rog
An ounce of responsablity is worth 10 pounds of state and fedral laws.

Offline Crabbyboater

  • ****
  • Sr. Member
  • Posts: 420
    • View Profile
Re: DW788 worklight
« Reply #5 on: April 10, 2011, 11:49:49 am »
I broke the bulb on my 788 while putting it together.  Went down to Home Depot and bought another 25w, and it's been working fine for about a year.  Not enough vibration to cause it to go.
Your web footed friend in Seattle, WA.

Offline spiderman

  • ****
  • Sr. Member
  • Posts: 441
  • Spiderman
    • View Profile
Re: DW788 worklight
« Reply #6 on: April 18, 2011, 05:11:01 am »
Where does one get a replacement bulb for the DW788 scroll saw worklight (DW7881)?

The dw7881 replacement bulb is  Model number is 25T8N/BL would be the right one for it.


25 watt 120 volt T8 Intermediate Screw (E17) Base Clear Home Appliance Light Tubular Incandescent Sylvania Light Bulb
« Last Edit: April 18, 2011, 07:57:00 am by cyberghost »
SPIDERMAN THE KING OF THE WEB

 

SMF

Teknoromi