No problem dunk. I didn't use a drawer. I cut out the outside shape, then cut a thin slab off the front, then cut the inside shape. then I cut a thin slab off each end of the center piece (which had been removed). The thin slab becomes the box top with one of the center cutoffs glued to it so it will hold position, and the remaining cutoff is glued in as a bottom to the box. Then I flock the inside. No drawer, just a removable top. I made it out of some 8/4 Mahogany scrap I had laying around. Pretty simple really. I tend to make more bandsaw boxes with tops than with drawers.
