News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.
1 Hour
1 Day
1 Week
1 Month
Forever
24 November 2024 /
Home
Help
Search
Login
Register
Scrollsaw Workshop Community -Please register to enable posting.
»
General Category
»
Tutorials, Techniques and Tips
»
Sanding a Blank
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Sanding a Blank (Read 3141 times)
dgman
Hero Member
Posts: 6916
Sanding a Blank
«
on:
March 07, 2011, 10:05:36 pm »
This tip will save you allot of time after your done cutting.
Before you mount you pattern, Sand your blank to finish grit, For me usually 220 grit. After you remove your pattern you only have to sand off the fuzzies with the same 220 grit.
Logged
Dan In Southern California
TripleB
Sr. Member
Posts: 382
Simply put, I love Scrolling!
Re: Sanding a Blank
«
Reply #1 on:
March 07, 2011, 10:59:49 pm »
Now thats just makes way too much sense, great info, Thanks
Logged
Visit my blog @
http://scrollsawparadise.com
Dobbo
Guest
Re: Sanding a Blank
«
Reply #2 on:
March 08, 2011, 03:59:39 am »
Thanks for the Info This Catergory is Great
Logged
Danny
Hero Member
Posts: 1674
Re: Sanding a Blank
«
Reply #3 on:
March 08, 2011, 12:38:58 pm »
Hey dg....Got away from attaching my pattern by using temp. spray glue to the wood blank, but can remember having to clean the top of the finished cutting with minerial sperits and had to do some more final sanding. Way to much needless work for me. Now I just apply good ole 2inch painters tape to the wood blank (after I have sanded to 220 grit) and use permanent spray glue to back of pattern and top of painters tape.
When finished cutting just peel the tape along with whats left over of the pattern and the wood blank is still ready to go. Just my 2 cents.Danny:+}
Logged
Danny :+}
dgman
Hero Member
Posts: 6916
Re: Sanding a Blank
«
Reply #4 on:
March 08, 2011, 01:36:35 pm »
Which ever way you go with the pattern and tape, Sand before to save time!
Logged
Dan In Southern California
Russ C
Hero Member
Global Moderator
Posts: 8458
Central Florida - USA
Re: Sanding a Blank
«
Reply #5 on:
March 08, 2011, 08:21:53 pm »
The tip was about
Sanding a Blank
, not tape or glue.
Logged
russ@simplywoodencreations.com
Keep The Blade On The Line.
Dawie
Guest
Re: Sanding a Blank
«
Reply #6 on:
March 09, 2011, 01:51:22 pm »
You sure right dg sanding before saves sooo much time, took me two years of scrolling befor I figured that one out.
David
Logged
nickchalker
Guest
Re: Sanding a Blank
«
Reply #7 on:
March 09, 2011, 08:46:47 pm »
Great rule to live by IMO!
Logged
Mainewoods
Guest
Re: Sanding a Blank
«
Reply #8 on:
March 09, 2011, 09:15:34 pm »
One of the first tips I picked up from this forum! Definitely a time saver!
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Scrollsaw Workshop Community -Please register to enable posting.
»
General Category
»
Tutorials, Techniques and Tips
»
Sanding a Blank
SMF
SMF Links
XHTML
RSS
WAP2
Theme by snrj
SMF 2.0.17
|
SMF © 2019
,
Simple Machines