Cutting table cleaner

[HWPlmbr1]

What do I use to clean the table of my scroll saw? I am new to scroll sawing and bought a used one with some rust on the table. Thanks

[julief]

Naval Jelly will clear the rust.  You can take some steel wool and wd40 to it.  There are many ways to clean it.

[carlton4143]

Caution naval jelly can pit the table. Use WD-40 with a scrub pad to clean the table. Then wax the table to prevent it from rusting again.
Carlton

[Russ C]

Either a Scotch Brite Pad or fine Steel Wool and WD-40. After you get it clean and the rust removed use a rag with some Mineral Spirits to remove any oily residue. Let dry, then you can use Johnson Paste Wax to help prevent rust and make the wood slide when cutting.  

[BilltheDiver]

I read a tip recently about using a scotchbrite pad under a random orbit sander to clean saw tables.  Sound logical to me.

[HWPlmbr1]

Thanks for the replies. The scotchbrite and wd40 worked and with the johnsons paste it is slicker than a babies bottom! Thanks Russ!