« previous next »
Pages: [1]   Go Down

Author Topic: what am i doing wrong?  (Read 2481 times)

Offline gramps

  • *
  • Newbie
  • Posts: 45
    • View Profile
what am i doing wrong?
« on: January 19, 2014, 02:01:04 pm »
trying my first attempt at stack cutting. using a stack of 3, 1/4 " baltic birch ply. i'm also using fd-ur#1 blades. my problem is i keep smelling the wood burning. should the speed of the saw be faster or?
             thanks again for your help, gramps
Logged

Offline Jim Finn

  • *****
  • Hero Member
  • Posts: 507
    • View Profile
Re: what am i doing wrong?
« Reply #1 on: January 19, 2014, 02:45:56 pm »
I would try slowing down the speed of the saw.
Logged
20"Hegner Polymax-3 (2008)
25"Hegner Multimax-3 (1986)

No PHD, just a  DD 214

Offline dunk

  • *****
  • Hero Member
  • Posts: 1625
  • Staying positive.
    • View Profile
    • Mike's Wood-n-Things
Re: what am i doing wrong?
« Reply #2 on: January 19, 2014, 03:15:35 pm »
Did you cover the stack with clear packing tape?  I'd keep the speed of the saw up & slow down your feed rate of the work piece.

edited to say  I missed that you are using a #1 blade on this project.  Move up to at least a #3 or #5.
« Last Edit: January 20, 2014, 12:04:54 pm by dunk »
Logged
Mike

Junk is something you've kept for years and throw away three weeks before you need it.

UHMNL

  • Guest
Re: what am i doing wrong?
« Reply #3 on: January 19, 2014, 03:26:03 pm »
A # 1 blade is way too small for cutting 3/4".
Use the 2" clear package tape, have good tension, good speed and push very slow into the blade, let the blade do the cutting.
FD Mike
Logged

Offline dirtrider73068

  • *****
  • Hero Member
  • Posts: 814
    • View Profile
Re: what am i doing wrong?
« Reply #4 on: January 19, 2014, 04:37:45 pm »
I use a #1 blade pending on what I am cutting have my saw turned up but cut slow letting the blade do the work, have tried a reverse but found cutting thick stock to use the ultra reverse 1 blade helps cutting thicker stock.
Logged

Offline Danny

  • *****
  • Hero Member
  • Posts: 1674
    • View Profile
Re: what am i doing wrong?
« Reply #5 on: January 19, 2014, 06:22:26 pm »
Just my 13 cents worth....I feel I have GREAT CONTROL of following the line and using my Favorite FD-UR #1 WHILE cutting a stack of only 2 of the 1/4 BB....Using the #1 blade I am referring to cutting a PORTRAIT where there are SMALL cut out areas.  To me its the ONLY
blade as some Frets are super tiny and needs a SMALL DRILL BIT.  I say if your not cutting a portrait like I described then by far its a BIGGER blade.  UR-#5 IS MY FAVORITE. 

I SURE ....LOVE....  TO GET A SUBJECT GOING.  THIS SOUNDS LIKE ONE.  WHAT SAY?
                                            Danny  :+}
Logged
Danny  :+}

Offline scotti158

  • ***
  • Full Member
  • Posts: 201
    • View Profile
Re: what am i doing wrong?
« Reply #6 on: January 19, 2014, 07:14:01 pm »
Quote from: FD Mike on January 19, 2014, 03:26:03 pm
A # 1 blade is way too small for cutting 3/4".

I agree, I would use a #5.
Logged
Tilt-O-Scroll DW788 Owner/Operater

Graywolf

  • Guest
Re: what am i doing wrong?
« Reply #7 on: January 20, 2014, 10:52:43 am »
The FD UR#5 is my favorite blade. On 3/4 stock high speed, slow feed pressure. I use circle blades for portraits, I WILL LEARN TO USE THEM!!!!!!!
Logged

Offline Danny

  • *****
  • Hero Member
  • Posts: 1674
    • View Profile
Re: what am i doing wrong?
« Reply #8 on: January 20, 2014, 06:56:07 pm »
Hey Greywolf....Circle blades is a First to me.  I guess they are Spirals huh?
We have Many people amongst our Scrolling Family that Swear by the. 
Me personally all I can say is I have tried many, many times and to me all
was a FLOP.  Either I had Bad times securing them to the holders or they
just kept breaking.  Just didn't really get the feeling for them.  I will always
stay with my UR-#1's....  Danny  :+}
Logged
Danny  :+}
Pages: [1]   Go Up
« previous next »
 

SMF

Teknoromi

SMF Links

  1. XHTML
  2. RSS
  3. WAP2
  4. Theme by snrj