« previous next »
Pages: [1]   Go Down

Author Topic: It's Finished  (Read 1663 times)

Offline Keefie

  • *****
  • Hero Member
  • Posts: 4550
    • View Profile
It's Finished
« on: July 14, 2013, 04:06:18 am »
Well it's finished, I must say I would have preferred to have made the bowl as well. If you look closely at the finished picture only the writing around the edge has the black behind it (and a little part of the helicopter skid) the rest he left white so it doesn't show up enough. I would have filled the writing with a black inlace resin, and the helicopter with a red inlace resin (the actual heli is bright red.) When sanded after that the bottom of the bowl would be smooth to the touch, not collect dust in the cuts and it would also have a nice colour to it. but that's just my opinion. You all see what you think?

The plate on the base of the bowl is engraved with   " Presented to HRH The Duchess of Cornwall on the occasion of her birthday on 17th July 2013 by the Cornwall Air Ambulance.   Hand crafted by the Mid Cornwall Turners".
Thanks again to Grampa (Paul) for the pattern.

Keefie
Logged
It's all a case of "Mind over Matter",  The Government don't Mind, and I don't Matter.

Offline DWSudekum

  • *****
  • Hero Member
  • Posts: 3677
    • View Profile
    • The DW Collection
Re: It's Finished
« Reply #1 on: July 14, 2013, 06:06:28 am »
That looks great.  If you took and put a layer of the clear casting resin in the bottom of the bowl it could fill up all of the nooks and crannies and give you a smooth bottom.  You have done an outstanding job.  Thanks for showing us your work.


DW
Logged
Life is tough, it is even tougher if you are stupid  -  John Wayne

Offline Tomsunnu

  • *****
  • Hero Member
  • Posts: 1608
    • View Profile
Re: It's Finished
« Reply #2 on: July 14, 2013, 06:11:18 am »
Keith, looks beautiful,very nicely done :) what wood is this? (Without sanding it looks so great) Not sure! on second thought, I am sure that I will not be able to get it in India ;D but just for general knowledge.
Logged
mahendra

Dalboy

  • Guest
Re: It's Finished
« Reply #3 on: July 14, 2013, 06:28:37 am »
Great job to both of you. Fantastic piece of scrollwork


I have never thought of using scroll saw with turned items. I have got some carving chisels to try carving some of my turning work.
Logged

countryscroller

  • Guest
Re: It's Finished
« Reply #4 on: July 14, 2013, 07:24:29 am »
Great work!!!
Logged

Offline Keefie

  • *****
  • Hero Member
  • Posts: 4550
    • View Profile
Re: It's Finished
« Reply #5 on: July 14, 2013, 07:29:55 am »
Mahendra, It was a piece of Ash the bowl was made from, it had just
started spalting in places, it was finished in "woodturners finishing oil" with a very little oil based stain mixed in to colour it slightly.

Keefie
Logged
It's all a case of "Mind over Matter",  The Government don't Mind, and I don't Matter.

Offline Al W

  • *****
  • Hero Member
  • Posts: 2535
    • View Profile
Re: It's Finished
« Reply #6 on: July 14, 2013, 08:29:21 am »
Maybe I missed something - is the scroll work cut separately and then attached, or did you scroll cut the bottom of a bowl.  IF the latter is true - how?

I like the appearance, however some color would have added some emphasis to the helicopter.  Especially one used for a formal presentation.

The scroll work looks quite nice, and of course Paul did a fine job with the pattern.

Thanks for showing us the bowl, may the presentation go well.

Al
Logged
Molon Labe

Believe half of what you see, and none of what you hear.

The government is NOT always right, or on your side.

Offline EIEIO

  • *****
  • Hero Member
  • Posts: 2147
  • Be Prepared.
    • View Profile
    • RMHayes, LLC
Re: It's Finished
« Reply #7 on: July 14, 2013, 08:55:07 am »
That's an interesting font with the sideways 'O' and the different looking 'B'. Can I ask where you got it?
Logged
EX-21 arrived 2-1-2013!
Porter-Cable PCB370SS in the corner
Lancaster Ohio
Ray Hayes - RMHayes@RMHayes.US
www.RMHayes.US

Offline frankorona

  • *****
  • Hero Member
  • Posts: 4030
  • Frankorona (Frank) (Crown)
    • View Profile
    • Frankorona?s workshop
Re: It's Finished
« Reply #8 on: July 14, 2013, 10:31:40 am »
Great job, looks wonderful.
Logged

Offline Marcellarius

  • *****
  • Hero Member
  • Posts: 6135
  • Scrolling each day, keeps the doctor away
    • View Profile
    • Some of my work
Re: It's Finished
« Reply #9 on: July 14, 2013, 10:54:54 am »
think it's a great job !!! nice wood and a great cut pattern!
Logged
Marcel

sometimes I make designer firewood....

Offline Russ C

  • *****
  • Hero Member
  • Global Moderator
  • Posts: 8458
  • Central Florida - USA
    • View Profile
Re: It's Finished
« Reply #10 on: July 14, 2013, 12:54:14 pm »
Absolutely fantastic, beautiful. Thanks for sharing with us.  :)
Logged
russ@simplywoodencreations.com

Keep The Blade On The Line.

Offline newfie

  • *****
  • Hero Member
  • Posts: 5037
  • The Way I Scroll
    • View Profile
    • some of my woodworking
Re: It's Finished
« Reply #11 on: July 14, 2013, 03:12:15 pm »
beautiful job.
Logged


excalibur 21
Every woodworker needs a fireplace

Offline Keefie

  • *****
  • Hero Member
  • Posts: 4550
    • View Profile
Re: It's Finished
« Reply #12 on: July 14, 2013, 04:56:52 pm »
Quote from: EIEIO on July 14, 2013, 08:55:07 am
That's an interesting font with the sideways 'O' and the different looking 'B'. Can I ask where you got it?

Ray, the pattern was kindly made for me by Grampa (Paul), sorry I have no idea what the font was

Keefie
Logged
It's all a case of "Mind over Matter",  The Government don't Mind, and I don't Matter.

Offline Tomsunnu

  • *****
  • Hero Member
  • Posts: 1608
    • View Profile
Re: It's Finished
« Reply #13 on: July 14, 2013, 11:24:54 pm »
Quote from: Keefie on July 14, 2013, 07:29:55 am
Mahendra, It was a piece of Ash the bowl was made from, it had just
started spalting in places, it was finished in "woodturners finishing oil" with a very little oil based stain mixed in to colour it slightly.

Keefie


Thank you Keith :)
Logged
mahendra

Offline wombatie

  • *****
  • Hero Member
  • Posts: 5557
  • Victoria Australia
    • View Profile
Re: It's Finished
« Reply #14 on: July 15, 2013, 02:16:18 am »
Keith I think that your idea would have worked better, but still it is a very nice piece.  Congratulations.

Marg
Logged
MARG

No one notices what I do until I'm not here to do it............
Pages: [1]   Go Up
« previous next »
 

SMF

Teknoromi

SMF Links

  1. XHTML
  2. RSS
  3. WAP2
  4. Theme by snrj