Author Topic: EX 21 question..  (Read 1101 times)

Offline dunk

  • *****
  • Hero Member
  • Posts: 1625
  • Staying positive.
    • View Profile
    • Mike's Wood-n-Things
EX 21 question..
« on: November 02, 2010, 09:37:46 am »
RE the ex 21 do you notice  much back and forth movement of the blade, from front to rear when sawing.  As if the blade is moving in a elipse?  I'm thinking of upgradng and if it has the same problem my 10 year old 788 is developing I'll just get  a new 788.

Thanks for any feedback.
Mike

Junk is something you've kept for years and throw away three weeks before you need it.

jim stiek

  • Guest
Re: EX 21 question..
« Reply #1 on: November 02, 2010, 03:25:16 pm »
call ray at seyco he can help you

Offline julief

  • *****
  • Hero Member
  • Posts: 3137
    • View Profile
Re: EX 21 question..
« Reply #2 on: November 03, 2010, 07:30:00 am »
Very little.  Not so you would notice it while cutting.  If you put a square to it, it is not square but the blade runs very close to true up and down.  I cut a lot of jigsaw puzzles and if it had a lot of back and forth movement, my pieces would not slide together from either side easily.  I also cut a lot of 2" walnut for box sides and have no problem.  Ray at Seyco can answer all your questions.

Offline dunk

  • *****
  • Hero Member
  • Posts: 1625
  • Staying positive.
    • View Profile
    • Mike's Wood-n-Things
Re: EX 21 question..
« Reply #3 on: November 03, 2010, 11:59:43 am »
Thanks for the feedback.
Mike

Junk is something you've kept for years and throw away three weeks before you need it.

bushy

  • Guest
Re: EX 21 question..
« Reply #4 on: November 04, 2010, 05:12:04 am »
G'day
I found with my Excalibur 21 inch. There is three  bolts. on the motor   loosen the three bolts just enough so you can turn the motor back and forward  . Hold  a small piece of wood against the back of the blade and turn the motor slowly back and forwards until there is no wobble back and forwards . Then tighten your bolts up again. Mind had the wobble   really bad and that stopped it completely . Cheers from Bob down under

Offline dunk

  • *****
  • Hero Member
  • Posts: 1625
  • Staying positive.
    • View Profile
    • Mike's Wood-n-Things
Re: EX 21 question..
« Reply #5 on: November 04, 2010, 10:30:28 am »
Thank you Bob!
Mike

Junk is something you've kept for years and throw away three weeks before you need it.

 

SMF

Teknoromi