The backer for the sign is 3/4 pine. The sign itself is 1/4 Cherry. This is not for anyone specific, I cut it to be a display model for my shows. It will allow me to show what it might look like and to give them some idea of any changes that they would like to make when ordering.
This bowl was cut from my scrap pile. I had a section of 1/4 inch mahogany and a section of 1/2 lauan plywood. After gluing the mahogany to the top and bottom of the lauan plywood I cut this bow. It is 4 1/4 in diameter. Sealed with tung oil and shellaced.
DW
