Pine and Mahogany 5 lobe bowl
Cut from a 1 inch thick pine and mahogany blank. The bowl was sealed and finished with wipe on polyurethane.
Black Walnut, Cedar, and Pine planter
Cut from a piece of Black Walnut with 3 inserts of Pine and Cedar. This planter was sealed and finished with Spar Varnish.
Mini Alarm Clock
Cut from Mahogany. Sealed and finished with shellac. This is a Steve Good pattern. An excellent way to use up small scraps.
Bamboo Name Plate
4 inches wide x 15 inches long x 10mm thick. Sealed and finished with spar varnish,
Mini Car
Made from the inside sections from my banks. The car with exception of the axles are made totally from scrap and have been finished in a beeswax and mineral oil mix.
Simple shell
Cut from pine. Finished with beeswax and mineral oil mix,
Compound Cut Donkey / Elephant
Cut from pine. Both the donkey and elephant are part of one cutting. Viewed one way - Elephant, Viewed the other way Donkey.
Compound Cut Ballerina / Swan
Cut from pine. Both the Swan and the Ballerina are part of one cutting. Viewed one way - Swan. Viewed the other way - Ballerina.
Gravity Wine bottle holder
Cut from cedar. The pattern for the grape vine is from a 2007 issue of SSWC. Finished with shellac.
DW
