« previous next »
Pages: [1]   Go Down

Author Topic: an introduction from brummie  (Read 3563 times)

Offline brummie

  • *
  • Newbie
  • Posts: 19
    • View Profile
an introduction from brummie
« on: September 03, 2013, 12:36:15 pm »
hi everybody I suppose it about time introduced myself,my first intro to scroll-saw was at the early age of 11 my father bought me a fretsaw we not that well of so I used to scrounge offcuts of timber from the local timber merchant there was a magazine called Hobbies I think it was monthly It still about today but yearly selling all modelling items but there not so much of the fretsaw patterns .
I did little bits fretsaw but the job meant I travelled around a bit so it did not get as much time to myself as would have liked.
So come my retirement  I bought myself Hegner scroll saw ,I found there were quite a few books with patterns by Patrick Spielman
so I plodded on like till my family at my age 75 got me in to the computer age so browsing through the web sites I came across scrollsaw  workshop I was gob smacked the patterns and information Steve Good videos and tips I suppose he is my mentor ,I then went on to the forum that was definitely a mind boggling experience the friendly banter I  still have to get on to Steve put me right get on to the forum.
thats enough verbal rubbish
Brummie   
     
Logged

countryscroller

  • Guest
Re: an introduction from brummie
« Reply #1 on: September 03, 2013, 01:51:59 pm »
Welcome, I'm Dustin from Ohio. Glad to have you with us.
Logged

Offline Toneman

  • *****
  • Hero Member
  • Posts: 1100
    • View Profile
    • TLC Miniature Horse Farm
Re: an introduction from brummie
« Reply #2 on: September 03, 2013, 06:06:14 pm »
Welcome! I am Tony,aka,Toneman from Paris, Texas.
Logged

Offline Al W

  • *****
  • Hero Member
  • Posts: 2535
    • View Profile
Re: an introduction from brummie
« Reply #3 on: September 03, 2013, 07:27:29 pm »
Greetings from South Dakota Brummie, Welcome to the madness and the addiction.

Al
Logged
Molon Labe

Believe half of what you see, and none of what you hear.

The government is NOT always right, or on your side.

Offline newfie

  • *****
  • Hero Member
  • Posts: 5037
  • The Way I Scroll
    • View Profile
    • some of my woodworking
Re: an introduction from brummie
« Reply #4 on: September 03, 2013, 07:44:36 pm »
welcome to the forum i'm Todd from NL Canada
Logged


excalibur 21
Every woodworker needs a fireplace

Offline Crabbyboater

  • ****
  • Sr. Member
  • Posts: 420
    • View Profile
Re: an introduction from brummie
« Reply #5 on: September 03, 2013, 09:16:36 pm »
Welcome to the forum,Brummie.  I'm John, AKA Crabbyboater from Seattle, WA
Logged
Your web footed friend in Seattle, WA.

Offline wombatie

  • *****
  • Hero Member
  • Posts: 5557
  • Victoria Australia
    • View Profile
Re: an introduction from brummie
« Reply #6 on: September 04, 2013, 02:20:28 am »
Hi Brummie, welcome to the forum.  I'm Marg from Australia formally of West Bromwich, just outside Birmingham.  If there's anything that you want to know just ask and someone will put you in the right direction.  Glad we didn't put you off with our shenanigans. :)

Marg
Logged
MARG

No one notices what I do until I'm not here to do it............

Offline Gabby

  • *****
  • Hero Member
  • Posts: 3069
  • Yer durn tootin'!
    • View Profile
Re: an introduction from brummie
« Reply #7 on: September 04, 2013, 02:36:43 am »
Hi Brummie, I don't usually respond to all the hello chatter but you sound like a good guy and ready to join in on the banter. At our ages it helps to lighten the load, and there are several of us getting on in years. One of them is referred to as Mr. Beard
LOL if you are really new to computers you may have to get used to the use of acronims and other silliness like using letters like LOL which means laugh out loud.
If I'm covering familiar ground sorry, so join in and welcome to the nut house.
I'll bet you have a lifetime of experience to share with the rest of us.
Head NUTCASE,
Gabby
Logged
MOLON LABE.
TRUST IN GOD!
 DON'T BELIEVE ALL YOU HEAR & DON'T SAY ALL THAT YOU THINK !

Offline julief

  • *****
  • Hero Member
  • Posts: 3137
    • View Profile
Re: an introduction from brummie
« Reply #8 on: September 04, 2013, 06:26:00 am »
Hi Brummie and welcome to the forum.  I'm Julie from Texas.  Glad to have you.
Logged

Offline Russ C

  • *****
  • Hero Member
  • Global Moderator
  • Posts: 8458
  • Central Florida - USA
    • View Profile
Re: an introduction from brummie
« Reply #9 on: September 04, 2013, 06:54:08 am »
Glad you found us. Hi I'm Russ from Florida your local moderator. Welcome to the Scrollsaw Forum.  :)
Logged
russ@simplywoodencreations.com

Keep The Blade On The Line.

Offline scrollgirl

  • *****
  • Hero Member
  • Posts: 1460
    • View Profile
    • Sheila Landry Designs
Re: an introduction from brummie
« Reply #10 on: September 07, 2013, 07:16:33 am »
Hi, Brummie - I am Sheila from Nova Scotia. Welcome to the group. It is a great place here to meet people and share ideas. I hope you enjoy your visits here and I look forward to seeing your work. :)

Sheila
Logged
Sheila A. Bergner-Landry
Designer, Artist, Teacher
Owner, Sheila Landry Designs
www.sheilalandrydesigns.com
Knowledge Is Power

Offline Keefie

  • *****
  • Hero Member
  • Posts: 4550
    • View Profile
Re: an introduction from brummie
« Reply #11 on: September 07, 2013, 05:45:53 pm »
Hi Brummie, welcome to the forum, I'm Keith from Cornwall
Logged
It's all a case of "Mind over Matter",  The Government don't Mind, and I don't Matter.

Offline Gabby

  • *****
  • Hero Member
  • Posts: 3069
  • Yer durn tootin'!
    • View Profile
Re: an introduction from brummie
« Reply #12 on: September 08, 2013, 02:35:44 am »
Well drat, I must have scared him off. Bummer!
Gabby
Logged
MOLON LABE.
TRUST IN GOD!
 DON'T BELIEVE ALL YOU HEAR & DON'T SAY ALL THAT YOU THINK !
Pages: [1]   Go Up
« previous next »
 

SMF

Teknoromi

SMF Links

  1. XHTML
  2. RSS
  3. WAP2
  4. Theme by snrj