Duck Dynasty Guys Portrait....:+}

[Marcellarius]

great job Danny, came out really good looking.
great pattern also!
and a great show, it's even here in Holland on TV!!

[termite]

  Danny i have been using a mirror to help in my bottom feeding. i put it next to my blade. it's hard at first working upside down but it gets easier the more i use
it. see what you think. termite

[Tomsunnu]

Hi Toneman....  Let me get back to yas about this.  I FEEL that Tom would not
mind me sending you his pattern, but need to make sure.  Danny  :+}

Hey Danny,feel free to pass it on as you like,it was made for you and now you have the distribution rights

[Danny]

Just checked this post after a couple days.  Termite your idea really sound lik
it might work for me.  I have ALWAYS SUCCEEDED with feeding that tiny lil blade
thru that .065 hole.  When they are in the MIDDLE of the blank it sometimes
is hard to see good.  

Heres a trick I have been doing.  After drilling the holes I take a AWL and poke
the backside hole to enlarge by a little.  Then using a dull pencil I twish the lead
to leave the dark mark.  Makes for locating the holes much easier.  Danny  :+}

[countryscroller]

Hey Danny, I use that same sorta idea with the holes on the back as well. I usually sand down the back to make it smooth for the scroll saw surface. Then poke the holes to be more visible with a pointed object, in my case I took an old phillips screwdriver and grinded it to a point.

[rigo]

You are good. I think this is a lot of work. Nice done