help with tape???

[3Dface]

i have used steve's tape method sense i started scrolling and love it.  i use 1/8th luan stacked 4 to 6 high for my family portraits and microwave the tape off the last 2.
now to my dilemma...

i will be using the same luan and stacking 4 high on a 10"x 26" portrait... ( i have a 16" saw)
2 probs...
1. it would take more than a roll to tape...
2. won't fit in micro to remove tape, my hair dryer won't work, and i don't have a heat gun.

are there any "cheap" alternates to tape that will not damage the face of the luan?

thanks,
chris

[scrollgirl]

How about putting them in the oven to warm the tape to remove it?  Not a hot oven, but maybe start at about 200 degrees and see how that goes?

Sheila

[Danny]

Never did the warming to remove product used to assist with the pattern, but Steve lead me
to the SHELF CONTACT PAPER.......Wow!  Such a Wonderful life now.  Very easy to apply to
the wood and removable is Easy.  Does not leave residue that the Painters tape will.
So this is just my Opinion..Thanks Steve..........Danny  :+}

P.S.  Bet I went thru a Dozen rolls of the painters tape before this.  Awful stuff to me now.  Never again.

[wedo]

Steve lead me to the SHELF CONTACT PAPER.......Wow!

I agree, this is the best!

[scrappile]

I have never tried warming to remove the tape.  I do us a straight end (called a chisel blade #18) X-acto blade to lift it then I pull it off.  Never had a problem.

[dirtrider73068]

I use those full sheet shipping labels, get 100 of them on amazon for 20 bucks, print and stick. They are really hard to peel off unless I use a hair dryer softens the glue and it peels right off, leave very little residue nothing a light hand sanding won't take care of.

I used the painters at first, it does great but at times can lift off or stick to well and on luan peel off the veener, I have ruin good projects due to this, shipping labels I have not ruined one yet since the hair dryer softens it to let it peel right off.