Author Topic: Portrait patterns  (Read 4836 times)

Offline Tomsunnu

  • *****
  • Hero Member
  • Posts: 1608
    • View Profile
Re: Portrait patterns
« Reply #15 on: March 04, 2013, 09:18:32 pm »
Many thanks, Mahendra, it really is appreciated.

Here's my first attempt. I think I am going to need lots of practice before I tackle Don's pattern, but I'll get there eventually.

The strange colouring is because it was a piece of scrap ply that had been painted. I just sanded it smooth instead of removing all the paint as I'm only practising.

Martin,you are most welcome, very nicely done  :) keep practicing as I was advised in attempting patterns and scrolling, you will get there ,when I can make patterns with no artistic background and the first pattern I made was in Aug of 2012 (fairly new) to reach where people have cut my patterns that means if you have the interest and get encouraged every time you attempt,anyone can do it :) all the best and thank you once again for your kind words.
Mahendra
mahendra

Offline Joleet

  • ****
  • Sr. Member
  • Posts: 410
    • View Profile
Re: Portrait patterns
« Reply #16 on: March 07, 2013, 03:19:12 pm »
Martin...Thought I would give Yana a try....Nice patterns guys
Ron... Twin Falls, Idaho

Me Slow?  I get up in the morning with nothing to do and go to bed at night with half of it done!

Offline Martin

  • ****
  • Sr. Member
  • Posts: 276
    • View Profile
Re: Portrait patterns
« Reply #17 on: March 08, 2013, 05:33:41 am »
Thank you very much, Ron. That shot is one I like so I will be giving that one a go, along with the rest of course.

I found another shot of Marina which I thought might be easier, at least from my point of view of cutting it, if anyone would care to have a go at it.

Offline EIEIO

  • *****
  • Hero Member
  • Posts: 2147
  • Be Prepared.
    • View Profile
    • RMHayes, LLC
Re: Portrait patterns
« Reply #18 on: March 08, 2013, 10:28:12 am »
here's one to try...
EX-21 arrived 2-1-2013!
Porter-Cable PCB370SS in the corner
Lancaster Ohio
Ray Hayes - RMHayes@RMHayes.US
www.RMHayes.US

Old Crow

  • Guest
Re: Portrait patterns
« Reply #19 on: March 08, 2013, 10:40:18 am »
Nice one, EIEIO! Here is my take on her.
Don R

Offline Martin

  • ****
  • Sr. Member
  • Posts: 276
    • View Profile
Re: Portrait patterns
« Reply #20 on: March 08, 2013, 07:03:52 pm »
Many thanks yet again, Don and EIEIO! Two more goodies to add to the production line. :) Scrolling is off for a day or three until my back recovers, though it picked the right time to be bad as there's minus temperatures forecast for the next few days.

Offline Tomsunnu

  • *****
  • Hero Member
  • Posts: 1608
    • View Profile
Re: Portrait patterns
« Reply #21 on: March 08, 2013, 10:26:10 pm »
...and another one from me :)

Mahendra
mahendra

Offline Martin

  • ****
  • Sr. Member
  • Posts: 276
    • View Profile
Re: Portrait patterns
« Reply #22 on: March 09, 2013, 04:05:47 am »
Thank you, Mahendra! I am more amazed each day by the generosity of you guys.

Offline Martin

  • ****
  • Sr. Member
  • Posts: 276
    • View Profile
Re: Portrait patterns
« Reply #23 on: March 17, 2013, 07:03:33 am »
I finally got around to having a go at Mahendra's pattern, as it appeared to be the easiest. I'll be trying them all when I get some decent plywood. The plywood I used was horrible stuff, even to someone like me with no knowledge of wood. I used a #0 Olson spiral blade. It came out better than it looked while I was working on it, but there's a couple of places where bits broke off. I'll probably send this as an experiment to see if it can survive the Russian postal system. :)


Offline Tomsunnu

  • *****
  • Hero Member
  • Posts: 1608
    • View Profile
Re: Portrait patterns
« Reply #24 on: March 17, 2013, 09:01:52 am »
Martin, very nicely done :) thank you and I hope it reaches Russia safely :)

Mahendra
mahendra

Offline wombatie

  • *****
  • Hero Member
  • Posts: 5557
  • Victoria Australia
    • View Profile
Re: Portrait patterns
« Reply #25 on: March 18, 2013, 12:57:26 am »
Boy there are some great patterns there.  Martin you cut that one beautifully, well done.

Marg
MARG

No one notices what I do until I'm not here to do it............

 

SMF

Teknoromi