Corian

[jimbo]

I have had a lot of  Corian given to me it is 5/16" thick and 2 1/4 x 2 1/4" square and the other is 5/8 x4" x 4" square. any ideas on what I can use it for,
Thanks
Jimbo

[IBMer]

Makes nice kitchen countertops.    Seems like you could use it with a scroll saw if it doesn't chip too easy.

[Merlin]

Someone in Foxton could use some if it's going.
Had a couple pieces 4x3 given me and cut some 3 inch crosses.

***Merlin***

[jimbo]

Thanks Merlin plain or fancy crosses? if you are at P/N work shop I will bring some through if there is any left
Jimbo

[UHMNL]

Jimbo,
Most use a blade with no reverse teeth. Polar # 5 is used a lot. Make sure you use the 2" package tape on the top of the pattern. This helps that it does not melt back together.
FD Mike

[jimbo]

Thanks Mike I have some polar blades
Jimbo

[newfie]

not quite sure but i think a lot of people make trivets from it.

[just Josh]

an issue of CWw&C had an intarsia type clown fish made of corian several years ago. 

And when I say several years ago, I mean roughly in 2000 or 2001