Author Topic: Blade For 3/4" Baltic Birch?  (Read 3710 times)

Offline Toneman

  • *****
  • Hero Member
  • Posts: 1100
    • View Profile
    • TLC Miniature Horse Farm
Blade For 3/4" Baltic Birch?
« on: January 30, 2013, 09:38:40 am »
Most of my projects have been cut from 1/8" to 1/2" Baltic Birch. Now, I have an order for 8 large crosses, and the lady insisted on 3/4" wood. So. I ordered the 3/4"(12" x 24") and began sawing yesterday with a FD-UR #5 blade and found it to be slow going! So, I ordered some FD-UR-#7 blades from Mike; hoping the sawing would go a little faster. Maybe I am just too impatient since I have not cut anything thicker than 1/2". LOL Anyway, your thoughts on this would be entertained!

Tony,aka,Toneman

countryscroller

  • Guest
Re: Blade For 3/4" Baltic Birch?
« Reply #1 on: January 30, 2013, 09:47:31 am »
From what I have learned, you should be fine with a #5 or #7, but UR blades are less agressive than just a plain blade( all teeth pointing down). That might help.

Offline dgman

  • *****
  • Hero Member
  • Posts: 6916
    • View Profile
Re: Blade For 3/4" Baltic Birch?
« Reply #2 on: January 30, 2013, 10:23:24 am »
Hey tony, as you found out 3/4" Baltic birch has a lot of plies which means a lot of dried glue. This makes for tougher cutting. Did you consider using 3/4" hardwood? At that thickness I see no reason to use plywood unless you like the look of it.
Anyway, you might try FD polar blades. They have a slight set to the teeth and are designed for cutting thicker wood. Good luck!
Dan In Southern California

Offline Russ C

  • *****
  • Hero Member
  • Global Moderator
  • Posts: 8458
  • Central Florida - USA
    • View Profile
Re: Blade For 3/4" Baltic Birch?
« Reply #3 on: January 30, 2013, 10:25:41 am »
A FD-UR #5 should be fine, has worked fine for me. Cutting on 3/4" BB plywood is going to cut slower. You must have patients my young padawan.  :D
russ@simplywoodencreations.com

Keep The Blade On The Line.

Offline GrayBeard

  • *****
  • Hero Member
  • Posts: 7088
  • My DW 788 sends you HUGZZZZ from Missouri, USA!
    • View Profile
Re: Blade For 3/4" Baltic Birch?
« Reply #4 on: January 30, 2013, 10:46:58 am »
I'm with Dan on this one too.

When I need long straight cuts I go to my "Polar Pack" and for this I would be using at least a #7, more likely a #9.

~~~GB~~~
I never really wanted to grow up....All I wanted was to be able to reach the cookie jar...and play with my DW 788

IBMer

  • Guest
Re: Blade For 3/4" Baltic Birch?
« Reply #5 on: January 30, 2013, 04:14:03 pm »
I've cut Angels from 1.5x1.5 purple heart, cocobolo and other super hard woods with my scroll saw using a FD #5.     It is slow going, but knowing that it's very dense and thick, I expect that it's going to take a long time.

I'm surprised that you are seeing a huge difference between 1/2 and 3/4 ply.     Going from 1/8 to 3/4 will surely make a pretty big difference in your speed.

J.

Offline Toneman

  • *****
  • Hero Member
  • Posts: 1100
    • View Profile
    • TLC Miniature Horse Farm
Re: Blade For 3/4" Baltic Birch?
« Reply #6 on: January 30, 2013, 06:12:13 pm »
Guess I will order some Polar blades and give them a try. I thought about solid wood, but, I am trying to keep my prices down. example: $8.60 for BB vs $16.47 for oak. Oh well, just need to slow down and be patient, which is hard for me to do.LOL

Offline dgman

  • *****
  • Hero Member
  • Posts: 6916
    • View Profile
Re: Blade For 3/4" Baltic Birch?
« Reply #7 on: January 30, 2013, 11:42:08 pm »
Patience young grasshopper. ;)
Dan In Southern California

Offline Toneman

  • *****
  • Hero Member
  • Posts: 1100
    • View Profile
    • TLC Miniature Horse Farm
Re: Blade For 3/4" Baltic Birch?
« Reply #8 on: February 01, 2013, 09:18:17 am »
Well, thank ya'll for the advice and ideas! I have made up my mind to never use any ply thicker than 1/2". I cannot belive the difference in 1/2" and 3/4"! If it has to be 3/4", it will be solid wood, and probably something soft like poplar! LOL

Tony,aka,Toneman

 

SMF

Teknoromi