Scroll Saw

[bigred7469]

I have a Craftsman 16" var. speed scroll saw, model #137.216020.  Does anybody know if there is a kit or a way to make it so I don't have to use a allen wrench to change out blades?  or at least change out the top screw?  Thanks for the inputs!!

Red

[jscott2]

bigred, I don't know the saw but would it be possible to replace the allen screw with something different?  For example, Lee Valley has a number of knobs for jigs - one might fit.  McMaster-Carr http://www.mcmaster.com/#knobs/=hs33cu also has a selection of knobs and handles.

If you can't find one, you might be able to make a suitable knob.  https://www.ridgidforum.com/forum/t16952/

Good luck, using an allen wrench must be a pain,
Jim

[wiserthnu]

This site has retro fit kits for most saws, I bought one for my dremel saw and it works great.http://www.pozsgaidesigns.com

[tux_linux]

As I see the picture of the saw at Sears, you just need to add a hand knob to the blade holder.

The blade holder is the standard blade holder that is used in most C-Frame scroll saws. The holder itself works pretty good.

Check out the spare part list of the Porter Cable Saw - it's the same clamp: Porter cable Scroll saw. It's Part 97 and Part 98, both are the same. (also check explosion view and manual to see it's the same blade holder).

[golfman]

On my craftsman I use the knob from the work hold down perfect fit

[bigred7469]

Thanks so much!!

Red