Messages

361

Computer questions / Re: Problem with Firefox NOT RESPONDING.... ?

« on: April 04, 2014, 06:52:53 am »

Thanks for this info.  Not sure about using Chrome.  Had it many years back and remembered having problems.  Anyway....  :+}

362

Computer questions / Problem with Firefox NOT RESPONDING.... ?

« on: April 03, 2014, 08:44:07 am »

As of the last 3 days every once in a while either from F.B. or Yahoo when I start to type THE BLUISH SPINNING CIRCLE (waiting thing) pops up and I CAN NOT DO ANYTHING! 

I have X out and restarted and MOST TIMES all works properly, but then again this problem will present itself. 

I HAVE ....RESTARTED THE PC....  Same thing happens at random times.

Hope someone out there can tell me what is making this happen and How to FIX it.

Always when the occurs I look up at the Firefox on the top and it will always say
              FIREFOX NOT RESPONDING.    Help....  Danny  :+}

363

Brag Forum / Re: flyfishing

« on: March 24, 2014, 07:38:02 pm »

Couldn't forget that pattern, but I must of.  LOL 
Great on your Scrolling buddy....  Yes will not be long before
WARMER weather will be with us....  Danny  :+}

364

Brag Forum / Re: Horse Clock

« on: March 24, 2014, 07:35:47 pm »

You have a Outstanding Display there Mate.  Good looking Crafts.  Yes being a Horse Lover myself I can see the Mrs. will just Love this....Keep um coming....Danny :+}

365

Tutorials, Techniques and Tips / Re: 3D, puzzle, fish, key chains

« on: March 24, 2014, 11:42:22 am »

Thanks Roger....You have always been a Inspiration to this Forum. 
     You did a Great Job of composing this Tutorial.  I shall attempt a few.  Danny :+}

366

Brag Forum / Re: Stable (dutch) in Corian

« on: March 24, 2014, 11:32:26 am »

Well As You Usual....You always do such a Great job of cutting your patterns.  Its another Great thing to have the ability to Design patterns.  Great Pattern too. :+}

367

General Scroll Saw Talk / Re: Printing Steve's Patterns.... :+}

« on: March 21, 2014, 06:46:26 pm »

Back again....Only Minutes....  Well that was a waste of a sheet of paper.  ALL PRINTED IN A ....LIGHT GRAY....  The only BLACK printed was Steve's Thickness of the wood. 

Melster....Yes....If I Right Click and Save It will go to my Download File.  And Then I can open it and go thru the same motions I just did, but Different outcome.  GRAY IS OUTLINED WITH A Nice Black.  Oh well.....   Danny  :+}

368

General Scroll Saw Talk / Re: Printing Steve's Patterns.... :+}

« on: March 21, 2014, 06:40:23 pm »

Thanks for BOTH of Ya's advice.... I will go to Steves Site and give another go at it.
Danny  :+}

369

General Scroll Saw Talk / Printing Steve's Patterns.... :+}

« on: March 21, 2014, 12:56:14 pm »

This subject has been on here before.
I am pretty sure before (not sure how long ago) when I brought up a pattern from Steves Pattern Vault I was able to Print from that.  Still can, but it prints exactly like Steve shows it.  Light Gray with No cut lines.  I have found by DOWNLOADING the pattern I can open it and be able to Print with the Cut Lines.  Not a big problem, but was just wondering or asking for an answer why this is?  Thanks....  Danny  :+}

370

General Scroll Saw Talk / Re: Flying Duchman sawblade.

« on: March 20, 2014, 10:47:46 am »

Good day Mr. Bullfighter....You are experiencing the Exact thing I did say around THREE years back.  Yes....Night n Day with cutting most Any Type of Wood.  Now if you would please could we see some of your Finished Crafts?  Danny  :+}

371

Pattern Requests. / Re: Question for Danny

« on: March 19, 2014, 05:04:55 pm »

Hi Dan and Very Happy to make your Acquaintance....  :+}
     Been a while since I cut the Duck Dynasty pattern, but 90% of all Portrait patterns will fit nicely into a 8X10 Picture frame.  Danny  :+}

372

General Scroll Saw Talk / Re: I'm a dummy that wants to learn Stack Cutting

« on: March 12, 2014, 04:09:09 pm »

Little late on this post, but thought I wanted to add my Procedures.
     I for sure do agree with all above mentioned favorite ways.  Have used them all.
I decide on the size of the blanks the pattern will need.  IE:  Ornaments
     I just add 3/8 to 1/2" on all sides.  Using ALEENS glue I just apply
Small Beads around the 4 sides.  Clamp for Approx. 15 minutes.  Ready for cutting.
Most of my Crafts are cut using Baltic Birch Ply.  FUZZES are a thing of the PAST.
Used the sacrificial bottom blank for years.  Never knew about Flying Dutchman.
I use the FD-UR#1 blade for 90% of all my cutting.  I Stack cut most all the time.
This blade only leaves very small amount of the Fuzzes.  Light sanding and the
bottom is as smooth as the top.  Only use the Adhesive back paper to print the patterns.  Works Great.  Anyway....  This is only my 13 cents worth.  Danny :+}

373

The Coffee Shop / MOSQUITO TRAP.... :+}

« on: March 11, 2014, 10:59:08 am »

HOMEMADE MOSQUITO TRAP:
Items needed:
1 cup of water
1/4 cup of brown sugar
1 gram of yeast
1 2-liter bottle

HOW:
1. Cut the plastic bottle in half.
2. Mix brown sugar with hot water. Let cool. When cold, pour in the bottom half of the bottle.
3. Add the yeast. No need to mix. It creates carbon dioxide, which attracts mosquitoes.
4. Place the funnel part, upside down, into the other half of the bottle, taping them together if desired.
5. Wrap the bottle with something black, leaving the top uncovered, and place it outside in an area away from your normal gathering area. (Mosquitoes are also drawn to the color black.)

Change the solution every 2 weeks for continuous control.

374

Computer questions / Re: Computer----PRINTER Problem.... ????

« on: March 10, 2014, 03:06:13 pm »

Thank you Becky....  I have already went though CANON support and my problem is in the PAST now.  Yea!  SOMEHOW the Printers DEFAULT settings got changed.  Probably ME!  Anyway its back up to its NORMAL SPEED.  YeePeeYea!!!!  Danny  :+}

375

Brag Forum / Re: another take on glider/tug

« on: March 07, 2014, 04:53:32 pm »

Well from reading your earlier post concerning cutting a straight line using a Spiral and now looking at the finished product I would say it looks Great from the picture. 
     Well done my friend.  I am not a Spiral person, altho Mike got me thinking of trying them again with his New Fangle Super Duper Spiral blade.  Danny  :+}