16
Pattern Requests. / Re: Frustration level HIGH
« on: November 15, 2015, 02:18:19 pm »
A BIG THANK you to fab 4 for helping me find my reindeer Pattern
Rick
Rick
News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Pattern Requests. / Re: Frustration level HIGH
« on: November 15, 2015, 10:54:18 am »
yep, WOO HOO !!!! that's the one
18
Pattern Requests. / Frustration level HIGH
« on: November 14, 2015, 08:15:13 pm »
I know I don't post much but I read most of all the forum. I am very frustrated with myself.
I have been looking for a certain pattern for 2 years. I had it at one time.
It was out of one of the Christmas Scrollsaw magazines from, oh I don't know, maybe 10-12 years ago. It could be back as far as 2000.
It was a stylized rocking reindeer, aprox. 12-15 inches long, and about 12" high. all made in pieces and put together with dowels. I tried looking for the past issues of all the scrolling magazines hoping it would be on the cover so I could see if I could order another one
I made quite a few of them many years ago and I have someone that remembered it and wanted me to make them again.
I bought the ones that Sheila had and made them, but it wasn't the same.
I realize it is a lot to ask but if someone could remember what issue ( not sure what magazine ), (creative woodworks, Scrollsaw workshop)? I would really be interested in finding a back issue or if it is no longer in print, buy just that pattern.
Thanks for at least letting me rant about losing the pattern.
I am still looking for my 3d book that has the dragon/soldier compound.
I must be losing my mind.... oh well..... not much to lose these days
Rick
I have been looking for a certain pattern for 2 years. I had it at one time.
It was out of one of the Christmas Scrollsaw magazines from, oh I don't know, maybe 10-12 years ago. It could be back as far as 2000.
It was a stylized rocking reindeer, aprox. 12-15 inches long, and about 12" high. all made in pieces and put together with dowels. I tried looking for the past issues of all the scrolling magazines hoping it would be on the cover so I could see if I could order another one
I made quite a few of them many years ago and I have someone that remembered it and wanted me to make them again.
I bought the ones that Sheila had and made them, but it wasn't the same.
I realize it is a lot to ask but if someone could remember what issue ( not sure what magazine ), (creative woodworks, Scrollsaw workshop)? I would really be interested in finding a back issue or if it is no longer in print, buy just that pattern.
Thanks for at least letting me rant about losing the pattern.
I am still looking for my 3d book that has the dragon/soldier compound.
I must be losing my mind.... oh well..... not much to lose these days
Rick
19
General Scroll Saw Talk / Re: RBI Hawk users - Help
« on: May 11, 2015, 10:02:02 am »
It can be a pain if you vary your blades much. I tend to stay right about 2/0 and 3/0 and don't touch the adjustment at all.
Like has been said see if it is wandering, the cam lock on the back may be worn. I put a very thin fiber washer under mine.
Rick
Like has been said see if it is wandering, the cam lock on the back may be worn. I put a very thin fiber washer under mine.
Rick
20
The Coffee Shop / Re: How to cut a cloud in half
« on: February 07, 2015, 09:49:31 pm »
Now , that was cool.
21
The Coffee Shop / Re: What's Up?
« on: December 14, 2014, 10:26:09 pm »
Hey CC, liked the t-shirt ( mining) in the video of the inlay. I am a small scale miner so it caught my eye 
. great video by the way. keep it up and my thoughts are with you and Dillon, I have a friend with MD.
. great video by the way. keep it up and my thoughts are with you and Dillon, I have a friend with MD.
22
Pattern Requests. / Re: plant stakes request
« on: August 10, 2014, 12:35:14 pm »
Yes , that would be wonderfull, Thank you
23
Pattern Requests. / plant stakes request
« on: August 10, 2014, 11:53:10 am »
Hi, I have cut out some of the planter stakes with the animals that steve posted, the clients at our veterinary hospital like them but have requested that I make some with dogs and cats. As I am comuter challenged 
I am wondering if someone could come up with a couple of patterns that have dogs and cats. I would post pics after cutting and thank you in advance.
Rick
I am wondering if someone could come up with a couple of patterns that have dogs and cats. I would post pics after cutting and thank you in advance.Rick
24
General Scroll Saw Talk / Re: Amazon find...tubes and rack for scroll saw blades, drill bits etc
« on: December 17, 2013, 09:27:41 pm »
i work in a vetrinary hospital, I get the new ( expired ) flats of unused blood tubes. I think there are 50 in a flat. if anyone needs some let me know.
I get them free so I give them free.
( I think I have 1 flat right now)
Rick
Hope I didn't steal thread.
I get them free so I give them free.
( I think I have 1 flat right now)Rick
Hope I didn't steal thread.
25
Pattern Requests. / Re: Giraffe letters
« on: December 15, 2013, 09:48:46 am »
thank you, the crown is the one at this late time.
I am such a procrastinater (?).
I will try to enlarge it a bit and it will be great.
Again many thanks.
Rick
I am such a procrastinater (?).
I will try to enlarge it a bit and it will be great.
Again many thanks.
Rick
26
Pattern Requests. / Re: Giraffe letters
« on: December 14, 2013, 12:49:19 pm »
sorry, i forgot. all leters cut into 1 crown.
Rick
Rick
27
Pattern Requests. / Re: Giraffe letters
« on: December 14, 2013, 12:48:30 pm »
Yes that is the pattern I cut with the teddy bears.
I am begining to think that the giraffe might not work, might be hard to line up.
My other option is to do a princess crown with the letters about 2" cut out of a crown something like this.
I am begining to think that the giraffe might not work, might be hard to line up.
My other option is to do a princess crown with the letters about 2" cut out of a crown something like this.
28
Pattern Requests. / Re: Giraffe letters
« on: December 14, 2013, 12:31:24 pm »
Sorry, i was looking for individual letter like the bears.
the letters I am looking for are GRACIE
I tried to do them myself but alas, I am not really computer savy and I don't have the programs to do these in 6".
I cut well but terrible at making patterns.
the letters I am looking for are GRACIE
I tried to do them myself but alas, I am not really computer savy and I don't have the programs to do these in 6".
I cut well but terrible at making patterns.
29
Pattern Requests. / Giraffe letters
« on: December 14, 2013, 12:07:08 pm »
I know i don't post much but I do read most all the posts here
I just got done cutting the little 6" bears with my nephews letters and I was wondering if anybody could do a letter pattern like that with a simple giraffe shape.
These are going on the kids doors to there new rooms.
Thanks in advance
Rick
but I do read most all the posts hereI just got done cutting the little 6" bears with my nephews letters and I was wondering if anybody could do a letter pattern like that with a simple giraffe shape.
These are going on the kids doors to there new rooms.
Thanks in advance
Rick
30
General Scroll Saw Talk / Re: My first try at stack cutting
« on: December 04, 2013, 09:43:16 pm »
Looks great. I did this one a couple months ago, fragile piece.
