Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Danny

Pages: 1 ... 73 74 [75] 76 77 ... 112
1111
Checking out at the store, the young cashier suggested to the
Older woman, that she should bring her own grocery bags because
Plastic bags weren't good for the environment.

The woman apologized and explained, "We didn't have this green
Thing back in my earlier days."

The clerk responded, "That's our problem today. Your generation
Did not care enough to save our environment for future generations."

She was right -- our generation didn't have the green thing in
Its day.

Back then, we returned milk bottles, soda bottles and beer
Bottles to the store. The store sent them back to the plant to
Be washed and sterilized and refilled, so it could use the same
Bottles over and over. So they really were recycled. But we
Didn't have the green thing back in our day.
Grocery stores bagged our groceries in brown paper bags, that we
Reused for numerous things, most memorable besides household
Garbage bags, was the use of brown paper bags as book covers for
Our school books. This was to ensure that public property, (the
Books provided for our use by the school) was not defaced by our
Scribbling's'. Then we were able to personalize our books. But
Too bad we didn't do the green thing back then.

We walked up stairs, because we didn't have an escalator in
Every store and office building. We walked to the grocery store
And didn't climb into a 300-horsepower machine every time we had
To go two blocks. But she was right. We didn't have the green
Thing in our day.

Back then, we washed the baby's diapers because we didn't have
The throw-away kind. We dried clothes on a line, not in an
Energy gobbling machine burning up 220 volts -- wind and solar
Power really did dry our clothes back in our early days. Kids
Got hand-me-down clothes from their brothers or sisters, not
Always brand-new clothing. But that young lady is right; we
Didn't have the green thing back in our day.

Back then, we had one TV, or radio, in the house -- not a TV in
Every room. And the TV had a small screen the size of a
Handkerchief (remember them?), not a screen the size of the
State of Montana . In the kitchen, we blended and stirred by
Hand because we didn't have electric machines to do everything
For us. When we packaged a fragile item to send in the mail, we
Used wadded up old newspapers to cushion it, not Styrofoam or
Plastic bubble wrap. Back then, we didn't fire up an engine and
Burn gasoline just to cut the lawn. We used a push mower that
Ran on human power. We exercised by working so we didn't need to
Go to a health club to run on treadmills that operate on
Electricity. But she's right; we didn't have the green thing
Back then.

We drank from a fountain when we were thirsty instead of using a
Cup or a plastic bottle every time we had a drink of water. We
Refilled writing pens with ink instead of buying a new pen, and
We replaced the razor blades in a razor instead of throwing away
The whole razor just because the blade got dull. But we didn't
Have the green thing back then.

Back then, people took the streetcar or a bus and kids rode
Their bikes to school or walked instead of turning their moms
Into a 24-hour taxi service. We had one electrical outlet in a
Room, not an entire bank of sockets to power a dozen appliances.
And we didn't need a computerized gadget to receive a signal
Beamed from satellites 2,000 miles out in space in order to find
The nearest burger joint.

But isn't it sad the current generation laments how wasteful we
Old folks were just because we didn't have the green thing back then?

Please forward this on to another selfish old person who needs a
Lesson in conservation from smart ass young people


We don't like being old in the first place, so it doesn't take
Much to &*^^ us off.


1112
Brag Forum / Re: Doll Rocker
« on: May 06, 2012, 11:59:38 am »
Hi....Was just looking at all your work and I must say....Everything....
Is Outstanding.  Can imagine you have many years of scrolling.  Danny  :+}

1113
Brag Forum / Re: My shell collection
« on: April 30, 2012, 05:16:09 pm »
Duh! for me....  I thought they were actually sea shells.  Duh!  They must have a lot of sanding n carving involved.  I'm just not into that kind of making dust.
     I sure would LOVE to watch a video of step by step how they are made.  Bet a lot of others would also.  Yes?  Danny  :+}

1114
Thanks to all for your warm comments and Marion when I showed my wife which I always make her the first to see.  My habit is to say close your eyes and this one I was right in front of her and she took a quick back step and made this funny whierd noise.  Hehe....  She Loved it tho....  Danny  :+}

1115
Brag Forum / My 1st so-so design....Off the wall sort of. LOL ....:+}
« on: April 30, 2012, 10:14:22 am »
This design has parts from various designers.  Out of the wild blue yonder I just thought of the being something different than cutting say a picture of a Wolf.  Oh yea I want to include my latest portrait of a Wolf also.  Pros n Cons always welcome.  Danny  :+}

OH OH....Forgot bout uploading problem.  Not even gonna try,  Will put them in my gallery.  LOL 

1116
General Scroll Saw Talk / Re: Scrapbook Hardware
« on: April 20, 2012, 08:17:38 pm »
GB I would Love to view your Scrapbook and Mrsn yours also.  This is very, very new to me, but am always looking for something new to tackle.  Danny  :+}
P.s.  Oh yea I checked into your link daliclimbs and For Sure would not spend that much on a lil screw with a top threaded part.  LOL  Danny  :+}

1117
General Scroll Saw Talk / Re: help project
« on: April 17, 2012, 10:10:39 am »
Steve Good has a Great pattern of a Church.  Pews and Preacher included.  Danny  :+}

1118
General Scroll Saw Talk / Re: Need Advice on Blade/Wood
« on: April 16, 2012, 10:34:12 am »
I agree with all the above.  Lately my experience with cutting projects out of stack of 2 ....1/4", also 1/2" and one using 3/4".  All of these projects were using either BB1/4", Popular 1/2" and Pine 3/4"....I have come to the conclusion that I have almost 100% control of all my cuttings.  All this yacking is because I have been using.....The....  FD....  #1 blade.  Cuts fast enough and has enough speed with cutting to be very relaxing.  Had always used either the
FD#3 or FD#5 for most all projects....Till now....  Danny  :+}

1119
General Scroll Saw Talk / Re: Excalibur 21
« on: April 16, 2012, 10:24:39 am »
Well my 2cents worth is after many years Scrolling and 4 different brands and finally now using the Hegner it all boils down to you get buy the best Scrollsaw you can afford.  Been using my 18" Hegner for a couple years now and I just have to say it is the Catalack of Scrollsaws.  Danny  :+}

1120
General Scroll Saw Talk / Pricing your work.... :+}
« on: April 13, 2012, 05:16:11 pm »
Scrollsaw Goodies put this article out which I feel is good information for anyone that is thinking about selling their crafts.  Danny  :+}

 Pricing Your Work

Your walls are covered and your shelves are overflowing with your scroll saw projects. Then it finally dawns on you?maybe you should start selling your work. But what should you charge? This is a tough question to answer. After all, you want to make it affordable so people would actually buy your products. But at the same time, you don?t want to short change yourself. While pricing structures can range from picking a number out of the air to complex formulas, here?s a good way to come up with a price for your scroll sawn art.

First, you must decide what your time is worth to you. Are you happy making $15/hr? $30/hr? Be sure to keep this figure realistic. While it would be nice to make $150/hr, chances are that my work isn?t worth more than $15/hr. Once you come up with a number, this becomes your target income goal.

Next, figure out what it would cost to make your product. Figure in your time and material cost. Material costs not only includes the materials used to make your product, but it also includes expendables like scroll saw blades, masking tape, paper, and printer ink. Figuring out the costs of your expendables might be a bit of a guessing game, but try to put a ballpark figure on it. While you?re at it mark up the material costs by about 20%. After all, you still have to hoof it over to the lumber store, pick your stock, haul it back home and organize it.

Don?t overlook expenses that occur in the sales process. Are you going to craft shows? Chances are, you?ll be spending all day trying to sell your wares. Be sure to compensate yourself for your time. Plus there?s booth fees and travel expenses to figure in too. Online markets charge listing fees and take a sales commission. Plus any time that you spend listing your products. See where I?m going with this?

Now its time to figure out what price to charge for you product. So take your time multiplied by your target income goal plus material costs. This is your price. But wait. We?re not quite done yet. Now that we have a price, we have to figure out if the market can bare that price.

When you come up with a number, compare it to what others sell similar items for locally. If others are selling it for more, raise your prices. If they?re selling it for less, decide if you?d be willing to take less. If not, see if you can reduce your time or cost to get the widget price closer to the market price. There are many times where it just isn?t worth your time to make that particular product. But there are many other items that you can make that has a nice profit margin. You may also concider the law of averages. Perhaps one product has to sell below what you?d be willing to take, but another product is selling for more. These two products may balance each other out in the long run.

 

Naturally custom work will cost more than items that can be ?mass produced.? Making several of one item is usually more time efficient than making them one at a time. If you do portrait style cuttings, be sure to stack cut your items so you get 3 or 4 copies. Other items, make jigs where possible to speed up production. Also keep an eye out on how to reduce material costs and any expendables. Often little compromises result in huge savings, thereby increasing your profit margin.

And lastly, know who your customer is. Flea market folks won?t pay $35 for a free standing puzzle, but a patron of an art museum would. Be sure to research your customers and what others are doing. Find someone who is doing well and copy them (their method, not their patterns). No need to re-invent the wheel.

Hopefully these tips will get you on your way to selling your wares. Its nice to earn a little extra money to keep yourself in sawblades and buy a new tool on occasion. But if you don?t sell anything, don?t worry. After all, its the journey, not the destination that counts.  ?by Travis Cook

1121
Computer questions / Re: Yahoo Users.... Gots a Problem.... Help!
« on: April 12, 2012, 03:39:06 pm »
Chelcass I think you hit the nail right smack on the head.  Didn't do anything to any of the settings and Bingo....  All is back in working order now.  Yea!  Just makes me wonder why this happens?  Thanks....  Danny  :+}

1122
Computer questions / Yahoo Users.... Gots a Problem.... Help!
« on: April 12, 2012, 01:20:44 pm »
Yesterday all was Ok....This morning all is Not OK....
Click on the CONTACT and all my contacts pop up.  Normal....
When composing or forwarding where all thats needed is to type a letter and a list of the ones are showed to pick one. 
Nothing is showed after typing the letter. 

Seems all of my contacts got lost somehow.  Help....  Danny  :+(

1123
Pattern Requests. / Re: amazing!
« on: April 09, 2012, 10:52:59 am »
Me Forths....  I was exactly the same a couple years ago as I just immediately felt these guys n gals are just what I need to further my knowledge in Scrolling and I have not ever been let down.  These peoples are my Scrolling Family.
                                                                 Danny  :+}

1124
General Scroll Saw Talk / Re: Recommendations for a band saw
« on: April 07, 2012, 08:34:52 am »
Thanks Taz....  Think I will try and remove one of the wheels and just see if I can shim it.  Just Love this forum.  Everyone is so helpful....  Danny  :+}

1125
Don't see any info. about whats going on with not being able to upload a picture.  Can anyone tell me?  Thanks....  Gots a few special things finished.
                                                                              Danny  :+}

Pages: 1 ... 73 74 [75] 76 77 ... 112

SMF

Teknoromi