151
Brag Forum / Egret
« on: October 08, 2012, 02:52:59 pm »
Egret - cut from an 11" x 8" x 3/4" kiln dried basswood slice. Finished with shellac.
DW
DW
News: Had a couple issues with the forum today. 1/19/2017. I believe I have them corrected now. Let me know if you have any trouble. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
152
Brag Forum / Stocking up for the next couple of shows in November.
« on: October 04, 2012, 08:54:12 pm »
Here are some of the latest that I have made....
Gone Fishin - pattern by Steve Good
Faith - pattern out of a back issue of one of my magazines
Five compound cut ornaments from Issue 49 Holiday 2012 issue of SSW&C
Rudolph - I have 24 more to cut
DW
Gone Fishin - pattern by Steve Good
Faith - pattern out of a back issue of one of my magazines
Five compound cut ornaments from Issue 49 Holiday 2012 issue of SSW&C
Rudolph - I have 24 more to cut
DW
153
Brag Forum / Santa Fridge Magnet.
« on: September 22, 2012, 01:17:34 pm »
I am finally getting in to the Christmas Spirit! Cut from 3/8 pine. The pattern was adapted from a public domain clip art. There are 5 - 1/8 in rare earth magnets in the back. Paints are acrylic and finished with lacquer. The magnet is 3 1/2 inches tall.
DW
DW
154
Brag Forum / Honey Do Magnetic Chalk Board with bee
« on: September 20, 2012, 10:21:20 am »
The word art is from Steve Good. The bee is from a public domain clipart and has been made into a small segmentation piece, the antenne are small solid copper wires. The bee has 5 1/8 in rare earth magnets embedded in the back. The black rectangle is magnetic chalkboard paint. The wood that this was made from is 1/4 3ply maple ply finished with a light stain and lacquer. It is 18 inches tall by about 10 inches wide.
DW
DW
155
Brag Forum / Cedar Candle Surround
« on: September 06, 2012, 02:20:56 pm »
Candle Surround cut from Cedar. Finished with shellac. Has a glass votive inside.
DW
DW
156
Brag Forum / Ribbon Box
« on: August 31, 2012, 03:24:02 pm »
Cut from white pine, the ribbon from 1/2 inch mahogany. Finished with Shellac and semi gloss lacquer. Size is 6 inch x 3 3/4 inch x 1 1/2 inch thick.
DW
DW
157
Brag Forum / Compound Cut Seahorse
« on: August 30, 2012, 09:01:40 pm »
Compound Cut Seahorse cut from a Yellow Pine 2x4 and glued to a white cedar slice. No stain was used. Finish is Shellac only several coats.
About 3 1/2 inches tall.
DW
About 3 1/2 inches tall.
DW
158
Brag Forum / Strange compound cut cartoon stork
« on: August 16, 2012, 09:13:53 am »
A few years back I found a pattern for a raindeer I liked and the book of patterns that it was in contained a couple of these strange but neat animals. Cut from pine about 3 1/2 inches tall glued to a white cedar slice. Finished with shellac.
DW
DW
159
Brag Forum / Piggy Bank Finished
« on: August 16, 2012, 09:06:52 am »
It is finished. I decided that it looked better unpainted. The finish is shellac.
DW
DW
160
Brag Forum / Small compound figures
« on: August 14, 2012, 12:14:05 pm »
Pattern for the figures by Diane Thompson. The base is a small 3 in. in diameter white cedar slice.
Swan Family
Pelican
DW
Swan Family
Pelican
DW
161
Brag Forum / Art Deco Cross
« on: August 13, 2012, 07:26:33 am »
Pattern by Steve Good. Cut from 3mm Maple ply. Overlay stained with Colonial Maple. Finished with shellac.
DW
DW
162
Brag Forum / WIP - Piggy Bank
« on: August 11, 2012, 11:48:33 pm »
The wood is pine, the pattern is a pig cutting board pattern that I have modified for the purposes of making it a bank. When done the bank will have plexiglass sides with brass screws holding them on. Currently the bank only has 3 coats of tung oil on it to seal the wood. I am undecided if I wish to paint it or not. The cork is just a short piece of 1 1/2 inch dowel with a 1/8 inch dowel installed so that the cork does not fall out.
DW
DW
163
Brag Forum / Another couple projects
« on: August 01, 2012, 02:59:17 pm »
4 lobe appleply bowl
Cat and Mouse cut from 3/4 pine and painted flat black.
DW
Cat and Mouse cut from 3/4 pine and painted flat black.
DW
164
Brag Forum / Latest projects
« on: July 30, 2012, 10:02:38 am »
A few years ago this pattern was in SSW&C it is now available for free on their site. This was a piece of scrap 1 in Mahogany that I had. Finished with beeswax paste.
Planter birds from one of my magazines - slightly modified
Cedar, Plywood and Pine are what the birds are made from.
Nothing sets a playful tone to a table full of things like these Moose. Cut from American Black Walnut and Poplar finished with tung oil and lacquer.
Sitting squirrel .. pattern by Steve Good.
Cedar square tissue box cover. Finished with lacquer.
DW
Planter birds from one of my magazines - slightly modified
Cedar, Plywood and Pine are what the birds are made from.
Nothing sets a playful tone to a table full of things like these Moose. Cut from American Black Walnut and Poplar finished with tung oil and lacquer.
Sitting squirrel .. pattern by Steve Good.
Cedar square tissue box cover. Finished with lacquer.
DW
165
Brag Forum / 3x5 Cross Box
« on: July 07, 2012, 07:24:09 am »
Made from Pine, Aspen and Aromatic Cedar. This box is 3 inches by 5 inches and 1 1/4 inches deep. It was finished with shellac.
DW
DW
