Scrollsaw Workshop Community -Please register to enable posting.

General Category => Brag Forum => Topic started by: DWSudekum on February 26, 2012, 11:17:46 pm

Title: Ring Bowls
Post by: DWSudekum on February 26, 2012, 11:17:46 pm

Started stocking up for the craft show season which is fast approaching.  I created a ring bowl to sit beside the sink so that you can put your rings in it when washing up or possibly doing the dishes ... what ever.  These have sold well here.  I used 5/16 in thick 3 in square red cedar with 1/4 in rings cut at 38.4 degrees.  These bowls were finished with shellac.


(http://s3i.dotphoto.com/i4F323CA0-4608-419E-B5D1-ED4FCDCB878A.jpg)
(http://s3i.dotphoto.com/iCC5B7A2C-9A23-4B75-A5F7-9AEB4FA6AF0A.jpg)


DW

Title: Re: Ring Bowls
Post by: BigPete on February 27, 2012, 02:28:16 am

Very nice DW, Nicely done...Pete

Title: Re: Ring Bowls
Post by: Tomsunnu on February 27, 2012, 03:06:44 am

Looks great! Thank you for sharing

Title: Re: Ring Bowls
Post by: malc on February 27, 2012, 05:19:05 am

Very, Very nice! I have always considered the art of bowl making without a lathe a bit of a black art, must bite the bullet one day and have a go. :)
Malc

Title: Re: Ring Bowls
Post by: Russ C on February 27, 2012, 06:19:22 am

They look great DW, nice work. Thanks for sharing with us.  :)

Title: Re: Ring Bowls
Post by: SheGold on February 27, 2012, 07:32:44 am

Lovely bowls DW... Sheila

Title: Re: Ring Bowls
Post by: frankorona on February 27, 2012, 08:05:33 am

Nice job, well done

Title: Re: Ring Bowls
Post by: newfie on February 27, 2012, 09:45:04 am

nice work on the bowls DW thanks for sharing

Title: Re: Ring Bowls
Post by: campasano on February 27, 2012, 11:11:11 am

DW, awesome bowls, I can see why they were great sellers.

Mike

Title: Re: Ring Bowls
Post by: Intarsia92 on February 27, 2012, 11:15:14 am

Very nice!!   They should sell good.

Title: Re: Ring Bowls
Post by: TheMelster on February 27, 2012, 11:33:34 am

 :) :) :) Sharp, thanx for the show and tell.

Title: Re: Ring Bowls
Post by: Rover2 on February 27, 2012, 11:47:31 am

Really nice DW.  Never tried doing those but will give it a try someday.  Thanks for sharing.

Title: Re: Ring Bowls
Post by: Keefie on February 27, 2012, 12:01:44 pm

they are really nice DW, thanks for sharing.

Title: Re: Ring Bowls
Post by: boxmaker on February 27, 2012, 06:03:47 pm

They look great DW, what a good idea.

Title: Re: Ring Bowls
Post by: Spartan scroller on February 27, 2012, 09:26:51 pm

Hi Dw: Those are great.  If you don't mind my asking, what is your price on those?  If you do mind, just ignore or send me a private message.

Thanks,
Terry
terrysscrollshoppe.blogspot.com (http://terrysscrollshoppe.blogspot.com)
terrysscrollshoppe.com (http://terrysscrollshoppe.com)

Title: Re: Ring Bowls
Post by: Al W on February 27, 2012, 09:28:16 pm

Very nice!!   I just bought a book on making bowls, and hope to try it soon.  Too much else to get done first.

Thanks for posting them.

Title: Re: Ring Bowls
Post by: DWSudekum on February 27, 2012, 10:46:34 pm

Quote from: Spartan scroller on February 27, 2012, 09:26:51 pm

Hi Dw: Those are great.  If you don't mind my asking, what is your price on those?  If you do mind, just ignore or send me a private message.

Thanks,
Terry
terrysscrollshoppe.blogspot.com (http://terrysscrollshoppe.blogspot.com)
terrysscrollshoppe.com (http://terrysscrollshoppe.com)

Terry

I was thinking around $4 - $5 anymore than that and they would seem too expensive and much less and they would not be worth making.

DW

Title: Re: Ring Bowls
Post by: Marcellarius on February 28, 2012, 02:53:38 am

very nice bowls, like all the different ways the grains look. great job