Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: lilcee on February 26, 2012, 08:47:54 am
-
I just received the new pattern from Steve Good in my email (an eagle - God Bless America). I'd like to try making it but I don't have much experience in round patterns. What's the best way to make it round or is there somewhere I can buy a piece of wood that is already round?
This may sound like a silly question but like I said, I've never made anything that was completely round.
Thanks for any help.
Oh, and the light part is the part to cut out?? Thanks
-
Steve has videos about cutting techniques. Slow down your saw and take your time. Practice practice practice.
-
Found it, thanks!
-
that pattern is uses to pieces of wood 1/2" backer board and 1/4" for the eagle and you cut out the white areas of the eagle then glue them together.
-
To get a good round shape:
cut outside of the line. Cut slow, but not too slow.
After that you should have a 180 grid sand paper glued on a board. That is in general a fine thing for fine cuttings, but here it comes best: Pull the edge of the piece across that sand paper and sand off the little bumps. Works great, you'll easily get a feeling for it and have much better round shapes.