Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: Dawie on January 06, 2012, 11:40:31 am
-
;D I really need to get saving now.
It's the excalibur 21"
The guy has a reference to Steve's blog on his site.
http://www.capellemanmachines.be/figuurzaag_excalibur_21.htm
David
-
Interesting! it is a different color and also looks as though it has a dust port
Jimbo
-
It is the same colour as my new one (I have the EX16) and yes there is a dust port under the table, it is a 2 1/2 " port but it screws flat to the table with only about a 1/4" gap at the blade side to let the air in, it put a strain on the motor of my extractor. So I took it off and cut a half round hole to let a larger volume of air through and it works like magic now.
-
great, a lot of money, but about the same as a Hegner.
would like to see one in action
-
great, a lot of money, but about the same as a Hegner.
would like to see one in action
So would I. Like it that you can raise the arm and that the housing instead of the table tilts.
David
-
That is good news. Start saving now David, you will really like it. A Hegner is a great saw to. :)
-
Interesting! it is a different color and also looks as though it has a dust port
Jimbo
Yeah it looks like a mini down draft table. Looks like the port could get in the way of changing the blades. (?)
Karl
-
No Karl, I thought it might too when I first saw it, but there is plenty of room to change blades