Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: Kepy on July 23, 2019, 11:36:23 am
-
I would like to testify today. First of all, I think Steve may have been somewhat angry when he designed the rose vase pattern. I just finished cutting the vase and roses in cherry. That is definitely punishment and I have 3 more to do. I did solve one riddle however, as I was cutting the outside. As usual, the cherry was burning pretty badly and all of a sudden I reached a place where I had put some clear tape to help hold the pattern down and the burning ended until I got past the tape. That blade was hot when I reached the tape and it did not burn at all as long as I was cutting through the tape. I am now a believer and will forever be putting a cover of clear tape before cutting.
-
I use clear tape a lot. especially on the edges of patterns and on thick wood.
-
I use clear tape and masking tape sometimes. It does help with burning wood issues and eases pattern removal. If the tape is under the pattern the down side I found is saw dust will collect at the edges of the saw kerf, sometimes that will interfere with work piece. I use a Pegas Modified Geometry blade and see a reduced burning on cherry, maple and birch. I also cut at a lower speed than I used to