Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: overfifty on May 31, 2014, 01:19:02 pm
-
Good morning. Do any of my Canadian colleagues happen to know where I can purchase a bow sander? I realize I can buy one on-line but I'd rather get one from a Canadian source. I've tried all the hardware / lumber stores in Kelowna, Penticton and Vernon and I had to explain to Customer Service what they were. Cheers, Barry.
-
Why not make your own? That is not that hard and a lot less expensive. Been using mine for about 7 years and they are very handy. Good luck :):)
-
This looks like a Canadian product. It also looks very simple to make.
http://www.intarsiadesigns.com/bowsander/bowsander.html
-
From what I've seen it appears a hacksaw could work well with a third point of contact on the top frame, or would it need more flexibility - thoughts?
-
Nope! Has to be made of wood! I'm a wood worker ;D Seriously, hacksaw would work and be length adjustable. The only downside I see is you would have to be careful not to hit the piece you are sanding with the metal.
-
What are your thoughts about 1/2 - 3/4 in. ply?
-
I made my own years ago and it is still going strong. Made it from some scrap oak I had laying around.
-
They don't look hard to make, but if you want to buy from a Canadian, take a look here:
http://www.intarsiadesigns.com/bowsander/bowsander.html (http://www.intarsiadesigns.com/bowsander/bowsander.html)
(http://www.intarsiadesigns.com/bowsander/bowsander.jpg)
-
Thanks guys. Ray - I saw that, and it looks pretty simple. I'll go to Rona tomorrow and see if they sell oak boards.
-
I like the idea of cutting your bow sanding belt from a standard sanding belt, if you can find a good way to tension it. That way the belt can be rotated around until it is all used up. You can buy 4x24 or 4x36 belts for $2 each and maybe cut 1/2" to 1" bow sanding belts from them.
I have some 1" emery cloth I bought on Amazon. It's meant for metal rather than wood, but it seems to work OK. When I have something small, I rip off a few inches and can get into some tight spaces.
http://www.amazon.com/Forney-71804-120-Grit-1-Inch---10-Yard/dp/B000KL5X60/ref=sr_1_1?ie=UTF8&qid=1401595488&sr=8-1&keywords=emery+cloth+for+wood+sanding (http://www.amazon.com/Forney-71804-120-Grit-1-Inch---10-Yard/dp/B000KL5X60/ref=sr_1_1?ie=UTF8&qid=1401595488&sr=8-1&keywords=emery+cloth+for+wood+sanding)
-
I'm going to fabricate the bow sander and then figure out the length of belt I need. Thank you, Barry.
-
The bow sander I use uses 10 inch belts cut to different widths. To add more tension to the belt you press the belt with your thumb. If I was making another one I use use a 10 belt for the pattern. The widths I use very from 1/4 inch to 1 1/2 inch. I would not be without it. If I am not mistaken the 30 dollars price above includes several different widths. Martin has been doing this for a long time.
-
Pardon my stupidity (gee I seem to say that alot) but this is the first I have ever heard of one I'll be making/buying one soon :-[
Pete
-
Cstm - me too, that's why I started this thread. Cheers, Barry. By the way, stopped at Home Hardware and Rona. A piece of S1S Oak board 3/4 in. x 6 in. x 4 ft. long costs $45 up here. I've said it in previous posts, unless it's spruce, pine or fir, which are native in this part of the world, you pay through the nose.
-
If you don't have the wood. or want to take the time, I would spend the $30 dollars. I have had no problem with mine and you will be amazed with the results of using it. Don't forget the pegs on the side of the Bow sander. The one Martins sells has knobs on them to keep the belt from coming off. May have some fun making them/ They can't be to much to buy if you can find them. BTW, not affiliated with Martin at all, just like to let you all know about good products
:) :).
-
I'm developing a plan on how I'd fabricate one. From the photo on the website they looked like pan-head screws, which didn't make much sense but a wooden peg does. Purchasing a length of oak would leave me with three feet to use on another project... decisions, decisions. Thank you, Barry.
-
Cstm - me too, that's why I started this thread. Cheers, Barry. By the way, stopped at Home Hardware and Rona. A piece of S1S Oak board 3/4 in. x 6 in. x 4 ft. long costs $45 up here. I've said it in previous posts, unless it's spruce, pine or fir, which are native in this part of the world, you pay through the nose.
We get 1x12 oak here from the lumber yards for about $5/bd-ft, and they cut it to the nearest foot. The local sawmills will sell it rough cut for about $1/bd-ft. Menards has a good selection of hardwoods, with oak and maple at about $3.50/bd-ft.
I could mail you some if you're willing to pay the shipping.
-
Thanks Ray. Shipping between the U.S. and Canada can be absurd. I'm going to keep my open for old furniture at the Re-store, or on the local buy and sell websites. Something will turn up. Thank you again. Cheers, Barry.
-
A guy in my scrolling club has an awesome design for these, and has made a ton of them. I have one someplace. (I just moved so it is in one of the boxes marked "shop")
I can't remember how he attaches the sand paper, i think a wing nut is involved. I will see if I can find it. I think he had the idea published someplace like SAW, or maybe one of the magazines.
-
That would be excellent. No point in re-inventing the wheel. Thank you very much. Cheers, Barry.