Scrollsaw Workshop Community -Please register to enable posting.

General Category => Tutorials, Techniques and Tips => Topic started by: Shogun on January 03, 2014, 10:31:57 am

Title: Finishes
Post by: Shogun on January 03, 2014, 10:31:57 am

Hi everyone, I am considering doing some larger projects pretty soon and am considering using lacquer in stead of an acrylic finish...I'm curious to know how many of you use lacquer and if you dilute it with lacquer thinner after sealing your wood.

Title: Re: Finishes
Post by: Jim Finn on January 18, 2014, 07:53:40 am

I used to use lacquer a lot but now I just apply two coats of shellac, sanding after each coat and then spray with an acrylic spray from a rattle can,  Spray lacquer would also work.