Scrollsaw Workshop Community -Please register to enable posting.

General Category => Brag Forum => Topic started by: frankorona on September 05, 2013, 01:12:34 pm

Title: my first bevel sawn bowl by swinggitar1950
Post by: frankorona on September 05, 2013, 01:12:34 pm

Hello everyone:
  I present my first bevel sawnbowl.
As seen in the video I followed all the steps.
http://www.youtube.com/watch?feature=player_embedded&v=gnQr2D0etuw (http://www.youtube.com/watch?feature=player_embedded&v=gnQr2D0etuw)
But I had a problem when making the holes in the wood at the angle indicated.
When inserting the drill, the perforation it curved doing elsewhere.
So cut circles independently.
And then put them together with wood glue.
How I can fix this problem?
I used a thin drill bit for drilling not noticed.
I occupied wood is 3/4 inch.
In advance thanks for your advice and comments.

Como se ve en el video segu? todos los pasos.
Pero tuve un problema a la hora de hacer las perforaciones en la madera en el ?ngulo que indicaba.
A la hora de insertar la broca , se curvaba haciendo la perforaci?n en otro lado.
As? que cort? los c?rculos de forma independiente.
Y despu?s los un? con pegamento para madera.
?c?mo puedo arreglar ?ste problema?
utilic? una broca delgada para las perforaciones no se notaran.
la madera que ocup? es de 3/4 de pulgada.
De antemano gracias por sus consejos y comentarios.

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: mickey357 on September 05, 2013, 01:30:44 pm

Looks great to me. You did a fine job on cutting. I watched the video, Thanks for the link.

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: countryscroller on September 05, 2013, 01:42:34 pm

Great looking bowl Frank!

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: Marcellarius on September 05, 2013, 02:11:22 pm

WOW, Frank, you did a great job!!

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: Al W on September 05, 2013, 07:47:18 pm

Very nice Frank.  Thanks for sharing with us.  Looks like you did just fine.

Al

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: heiko rettberg on September 06, 2013, 01:27:34 am

Looks nice, greate job.

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: newfie on September 06, 2013, 10:43:01 am

looks great Frank

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: Danny on September 06, 2013, 11:24:56 am

Now that is into the Wow! area.  Love the looks of the Grain and really think you did a OUTSTANDING
job on cutting and all.  Great Video Frank....  Danny  :+}

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: rigo on September 06, 2013, 02:22:56 pm

for the first time ,you did it very well.You are a great scroller.

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: Intarsia92 on September 06, 2013, 02:48:35 pm

Very well done. Your bowl looks great.

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: wombatie on September 07, 2013, 05:39:55 am

You did an amazing job Frank. Congratulations.

Marg

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: Russ C on September 07, 2013, 08:22:55 am

Looks fantastic, nice work. Thanks for sharing.  :)

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: Keefie on September 07, 2013, 02:43:06 pm

very nice work Frank, looks great.

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: spirithorse on September 07, 2013, 06:37:41 pm

Excellent job, Frank!
Thanks for the video link and thanks for sharing.

As for the drill bit drifting, you probably just have to slow down on the downward pressure to
allow the drill bit to cut through with very little pressure.
God Bless! Spirithorse

Title: Re: my first bevel sawn bowl by swinggitar1950
Post by: lion1234 on September 13, 2013, 08:25:51 am

excellent,i am only a beginner,i wish i was as good as you,excellent.