Scrollsaw Workshop Community -Please register to enable posting.

General Category => General Scroll Saw Talk => Topic started by: pieter on August 02, 2013, 11:51:16 am

Title: Baltic Birch Plywood
Post by: pieter on August 02, 2013, 11:51:16 am
I am looking for recommendations of where to buy (online) "good 2 sided" 1/16" Baltic Birch.  I have purchased BB from Sloan's and have been satisfied, but they no longer sell BB in that size, only Finish Birch (no explanation if it is good 1 or 2 sides) aircraft grade.  Your help will be greatly appreciated!

Pieter
Title: Re: Baltic Birch Plywood
Post by: EIEIO on August 02, 2013, 12:01:23 pm
Here's a price list from Woodwerx:
http://www.woodwerks.com/LumberRetailPriceList.pdf (http://www.woodwerks.com/LumberRetailPriceList.pdf)
I don't see 1/16" listed there, but you might call them to ask. Their number & web site are at the bottom of the 2nd page.
Title: Re: Baltic Birch Plywood
Post by: jeff44 on August 02, 2013, 01:54:27 pm
Check out Michael's, they are also on line.  They sell a lot of craft boards and paints.
Title: Re: Baltic Birch Plywood
Post by: Pinelog on August 02, 2013, 03:27:58 pm
Check out Michael's, they are also on line.  They sell a lot of craft boards and paints.
I have yet to find ANY BB listed on a Michaels website.  Nor do they sell anything online that I can see.  They dont even post prices so that you see what you are getting before you have to drive to a store.   

IMHO they have the most bass ackward web presence that I have seen in years.
Title: Re: Baltic Birch Plywood
Post by: mrsn on August 03, 2013, 10:02:53 pm
most of the big craft stores have terrible websites. Michaels, hobby lobby, and joann all have no products online. (JoAnn is just starting to put a few things on, the last I checked)

All of the craft stores do have good BB ply, but you can't ask any one for it. They will give you stupid looks and wander around.
Some times it is with model making stuff, other times it is with the "woodworking" stuff. You have to ignore all of the laser cut crap for $0.99, but the michaels and joann in my area both stock a US made bb ply.

On a side note. I did some research going to the craft stores, Rockler and a lumber yard for BB ply and the prices at each. I can't remember the exact prices, It is probably on the forum someplace. The results were if you can buy a 5x5 sheet at the lumber yard that is the cheapest way to go (but the most "hassle" trying to transport and cut it) The craft stores sold a 1'x2' piece for less then Rockler sold a slightly larger piece. The 1'x2' piece is nice for me, I can get 2 portraits and a few ornaments for $3-4. The quality is as good or better then what I get at my lumberyard.
Title: Re: Baltic Birch Plywood
Post by: edward on August 04, 2013, 09:35:30 am
 Michaels does have some nice BB, I buy 1/8 12x24 for around $4.99, some times I use a coupon for like 40% off, in the local paper. So far I haven't had any problems. They also carry other sizes. I believe they get there wood from mid west lumber.  edward
Title: Re: Baltic Birch Plywood
Post by: tvman44 on August 04, 2013, 10:28:05 am
Over here Michael's has a much better stock of BB than Hobby Lobby and both are of good quality.  Michael's web site has no prices and Hobby Lobby's is not a whole lot better. :)
Title: Re: Baltic Birch Plywood
Post by: tdub4ever on August 04, 2013, 07:35:36 pm
I usually buy 1/8" BB ply from Woodcrafters. I get a 24" x 30" for $8. Haven't priced any other sizes tho'.
Title: Re: Baltic Birch Plywood
Post by: kenreich on August 06, 2013, 08:36:11 am
My local lumber yard sells BB ply and they can order any thickness I need.  The 5'x5' sheets of 1/4" BB is $25 which makes it $1/sq. ft.  Cheaper than my other option which is Woodcraft.  That's also cheaper than the craft stores.  They can get 3/8" and 1/2" which are a little more (up to about $29-$30 dollars) and they can also get 1/8".

They keep some in stock for drawer sides and bottoms.
Title: Re: Baltic Birch Plywood
Post by: dirtrider73068 on August 06, 2013, 08:57:27 pm
Check out Michael's, they are also on line.  They sell a lot of craft boards and paints.
I have yet to find ANY BB listed on a Michaels website.  Nor do they sell anything online that I can see.  They dont even post prices so that you see what you are getting before you have to drive to a store.   

IMHO they have the most bass ackward web presence that I have seen in years.

Micheals has it its will be by the model stuff, its runs about 8 bucks for think its 1 foot by 2 foot piece. Hobby lobby has it but its about a dollar more for it, if you go into the craft stores tell them you ware wanting the craft wood, not the balsam wood used for model planes.
Title: Re: Baltic Birch Plywood
Post by: pieter on August 11, 2013, 11:34:53 pm
Wow, thank you for the many responses; will have to check the mentioned stores online and locally.  Funny thing is Michael's sells 1/32", 1/64", and 1/8" on up, but no 1/16". 

Pieter