Scrollsaw Workshop Community -Please register to enable posting.

General Category => Introduce Yourself. => Topic started by: Scroller Kev on November 28, 2012, 10:08:10 am

Title: Hello from the UK
Post by: Scroller Kev on November 28, 2012, 10:08:10 am

Hello Everyone !

I live in South Wales in the UK, i have only been scrolling for just a few weeks and just about got the hang of it now.  ::)
It was a case of : on the line, off the line and across the line a few times ! but , i kept on with it and seem to have almost got the hang of things.
I had no idea of the so many great things a Scoll Saw could do !
I have completed a few projects but ,  nothing too much as yet. I hope to put up a couple of pictures soon and look forward to you comments, good or bad . ;D.
Thanks for reading this and i hope we all have a great future !
All the best , Kev

Title: Re: Hello from the UK
Post by: dgman on November 28, 2012, 10:13:58 am

Hey Kev, Welcome to the forum! I'm Dan from Southern California, U.S.A. You will find lots of advise here from folks from all over the world. Feel free to ask questions! So come on in and join the fun!

Title: Re: Hello from the UK
Post by: Russ C on November 28, 2012, 10:20:53 am

Hi I'm Russ from Florida. Welcome to the Scrollsaw Forum. A day without saw dust is like a day without sunshine.   :)

Title: Re: Hello from the UK
Post by: Al W on November 28, 2012, 10:29:14 am

Greetings Kev, from South Dakota USA.  Lots of knowledge and experience here, feel free to tap the information base.  Welcome to the addiction and hope your future bodes well.

Al

Title: Re: Hello from the UK
Post by: countryscroller on November 28, 2012, 10:31:23 am

Welcome to the forum. I am Dustin from Ohio, USA

Title: Re: Hello from the UK
Post by: Scroller Kev on November 28, 2012, 10:32:41 am

Hey Dan and Russ .

Thanks for the welcome. I used to fit Hardwood Sports Flooring for a living but now retired to the country side, my little workshop is my BoltHole in life and since starting scrolling i have learnt that cutting a 600sq ft sport floor Scroll cutting is a whole lot differant !
BTW Dan , i was going to upload a few pictures of my 1st projects but , i looked at your site and the kind of thing you manage to do i think i will wait. The next thing i might do is to work out how to attatch photo,s in this Forum.

Title: Re: Hello from the UK
Post by: Keefie on November 28, 2012, 01:26:38 pm

Hi Kev, welcome to the forum, I'm Keith from Cornwall

Title: Re: Hello from the UK
Post by: rob roy on November 28, 2012, 01:42:17 pm

Hi Kev, I'm Roy from Scotland. I would agree with all the statements here so come and join the mad house. You will enjoy it.
Rob Roy.

Title: Re: Hello from the UK
Post by: Keefie on November 28, 2012, 02:02:20 pm

Kev, thought I'd better warn you, don't go on horseback to visit Rob Roy in Scotland as he's the biggest horse thief in the forum!!!   (next to Gabby that is lol) Seriously though I don't think you could find a better bunch of lads and lasses than we have in this forum.

Title: Re: Hello from the UK
Post by: newfie on November 28, 2012, 04:03:29 pm

welcome Kev i'm Todd from NL Canada welcome to the forum

Title: Re: Hello from the UK
Post by: Scroller Kev on November 28, 2012, 05:16:05 pm

Hey Todd

thanks for the warm welcome.

Title: Re: Hello from the UK
Post by: rob roy on November 28, 2012, 05:25:29 pm

Hey Keefie, never thought of that. lots of lovely Welsh Ponies down there. Need to make some arrangements with Gabby.  ::) ::) ::) ::) ::) ::) ::) ::) ::) ::).
Rob Roy.

Title: Re: Hello from the UK
Post by: jrpeteo on November 28, 2012, 06:03:42 pm

Hi Kev, welcome to the group.
I'm Pete from Minnesota, USA.

Title: Re: Hello from the UK
Post by: Billy in Va on November 28, 2012, 10:25:40 pm

Hey Kev  Welcome and glad you found us. 

Billy in virginia USA

Title: Re: Hello from the UK
Post by: wombatie on November 29, 2012, 12:38:01 am

Hi Kev, welcome to the forum.  I'm Marg from Australia.  As you can tell there are a couple of larakins on the site, but the rest of us are really nice people.  LOL  Have fun with your scrolling.

Marg

Title: Re: Hello from the UK
Post by: julief on November 29, 2012, 05:34:13 am

Hi Kev and welcome to the forum.  I'm Julie from Texas.  Glad to have you.

Title: Re: Hello from the UK
Post by: Judy Hunter on November 29, 2012, 10:29:25 am

Hey Kev, Welcome to a really great group. This is where the sawdust flys and sometime a lot of BS too  ;D

Title: Re: Hello from the UK
Post by: Vonsarge on November 30, 2012, 03:25:06 pm

Hi Kev. I'm up the M6 in Liverpool. Nice to have you on board. What saw are you using. Our American cousins can get some great tools and timber.

Title: Re: Hello from the UK
Post by: gray6611 on December 07, 2012, 02:48:23 am

welcome to best scrolling community in the world. i live in hull

Title: Re: Hello from the UK
Post by: Stravides on December 21, 2012, 08:00:08 pm

Quote from: Scroller Kev on November 28, 2012, 10:08:10 am

Hello Everyone !

I live in South Wales in the UK, i have only been scrolling for just a few weeks and just about got the hang of it now.  ::)
It was a case of : on the line, off the line and across the line a few times ! but , i kept on with it and seem to have almost got the hang of things.
I had no idea of the so many great things a Scoll Saw could do !
I have completed a few projects but ,  nothing too much as yet. I hope to put up a couple of pictures soon and look forward to you comments, good or bad . ;D.
Thanks for reading this and i hope we all have a great future !
All the best , Kev

Kev, where do you live in S.Wales - I'm in Newport - anything that you need or I can possibly help with, gimme a shout...

Title: Re: Hello from the UK
Post by: Toneman on December 21, 2012, 08:16:07 pm

Welcome! I am Tony,aka, Toneman from Paris, Texas.