Scrollsaw Workshop Community -Please register to enable posting.
General Category => General Scroll Saw Talk => Topic started by: newfie on September 25, 2012, 04:31:39 pm
-
I was out cutting a stack of 5, 1/8".project i had on the go for awhile.had about 150 cuts in it and around 6 to 7 hours in it over i say 2 month period and what ya know snapped a BIG piece right out of it.looked at it nothing else to with it now besides throw it in the designer fire wood pile.
-
Sorry for your lose mate, I know the feeling well.
***Merlin***
-
I know that feeling well, done it myself a few times, usually on the last few cuts too.
-
Been there, done that, have the tee shirt!
-
:'( :'( :'( :'( :'(
-
Wait for a cold day to use it again, at least you will get "some" warmth from your task. Sorry for your loss. Don't let it stop you from pressing on.
-
I feel your pain. I was making the last cut on a very thin piece of purpleheart for a Christmas ornament this weekend when a crucial piece declared its independence.
-
sorry to hear, again it has happened to me, I feel your pain >:( >:(
-
Been there--done that !!!I think we all have,so we do feel you pain.God Bless and keep cutting.
-
I know it doesn't make it better but most every one of us has done the same thing or something similar.
Take a break and Venture Onward!
~~~GB~~~
-
This has happened to me a couple of times - on projects that were already finished. As a rule, I try not to cuss, but...
Hang in there!!!
Bobby
-
Sorry, that is one of the most aggravating parts of fretwork projects. I have found it is best for me to put that pattern aside for a time. If I jump right back in, to the same project, I invariably make another mistake pretty quickly. I think I try and hurry to make up for lost time. Scrolling and hurrying are a recipe for disaster, for me anyway.
Hang in there.
Barry
-
Hey Newfie.... Yepper. Done been there also....BUT.... As of the past month or so I have decided on studying the over-all pattern. Find the more delicate areas and either mark them or remember. When I get to one of them I may start my entry from two directions. I also have started the cut of the delicate areas at the part that I think might be apt to break. Finish the cut into a more solid area. Have completed many Ornaments that have lots of delicate areas and so far so good. Yea! Danny :+}
-
Oh yea.... Forgot to mention the most important thing (my 2 cents worth).
Unless a INSIDE cut is mostly large I WILL ALWAYS USE the FD-UR#1
BLADE.... I feel very comfortable cutting (BALTIC BIRCH PLY) up to
3/4" this way. Have had very, very good luck and I surprise myself
by how easy it is to follow any type of line. Outside areas are mostly
FD-UR #3 OR #5.... Only Flying Dutchman Blades. Danny :+}
-
Along the lines of what Danny said, I too nearly always start a cutting with the smallest areas to be cut. Even if it means working at various areas of the over all pattern. in that way you keep the most meat (wood) for strength for the longest time as you work. I nearly always leave the outside for the last cut unless it is just too big to handle. Even then, I rough cut around the outline of the outer perimiter untill all the inter cuts are done.
Rog
-
Oh man... you are scaring me..... I am getting to a critical point on a project and that is all I am thinking about.... Maybe nobody will notice if I just leave the patttern on and don't cut the rest :o
-
Hehe....You made a funny.... Hehe.... Seriously of course Practice does get a person to the confident level of not worrying about any type of inside cuts. I have learned that running the saw at a slower speed will cause the fragile points to break more easily. Bout 3/4 speed to me is good. Of course like I have been professing the
FD=UR #1 blade being so small will let you follow any line more easily. Good Luck and always Enjoy.... Danny :+}
-
Yep, I have done that before. Sometimes I get lucky and can repair the project, and sometimes designer fire wood. 8)
-
Well as you can see your not alone.It might have been your first but don't bet on it being your last.All of us made designer firewood....Dave
-
Awwww that is so sad. I always fear that it will happen to me when I work on things. Right now I am on a pretty big project for me (probably real small for all you) and I just keep hoping I finish without it breaking. Well, keep working on things. And sorry to hear that one broke.
-
thanks, but thats not the first one that broke just that it was a stack cut of 5 and broke them all >:( >:( >:( >:( >:(