Scrollsaw Workshop Community -Please register to enable posting.

General Category => General Scroll Saw Talk => Topic started by: cherie on April 26, 2012, 11:24:50 am

Title: HELP!
Post by: cherie on April 26, 2012, 11:24:50 am

Can anyone direct me to a source for 1/4" cherry plywood about 18"x18" or 16"x16".  Having problems finding some.  I might have to talk the customer into a smaller piece.  That would be bad.

Title: Re: HELP!
Post by: GrayBeard on April 26, 2012, 11:32:55 am

You are most likely to find it at a mill that caters to cabinet shops and finish carpenters...here is one in my local area but be forewarned ... they tend to be a bit expensive!

http://www.stcharleshardwoods.com/pages/mold.php?ID=259&companyShow=Cherry&page=1&uberCatS=Hardwood+Plywood (http://www.stcharleshardwoods.com/pages/mold.php?ID=259&companyShow=Cherry&page=1&uberCatS=Hardwood+Plywood)

Do a google search of this <hardwoods,plywood, Springfield, MO>. It brings up several vendors in yoour area!

~~~GB~~~

Title: Re: HELP!
Post by: mainberg on April 26, 2012, 01:29:35 pm

Wildwood has cherry plywood, 16"x24". Not cherry all the way through, but good two sides. wildwoddesigns. com

PatB

Title: Re: HELP!
Post by: Coffeepot on April 26, 2012, 01:45:20 pm

Cherry for Cherie... ;)

If you have time to order online, Heritage sells it in 12 x12, 12 x 16 and 12 x 20.

http://www.heritagewood.com/#!__scrollsaw-part-2